We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black curved dual monitor wall mount arm with two VESA plates and central bracket

TAURKENAM

TAURKENAM Dual Monitor Wall Mount Arm 27 inch 22lbs office equipment

SKU CH-SJ37-NQCRZ

Wall-mounts two 27-inch screens on concrete or brick, each arm holds 22 lbs, VESA 75/100, tilts ±45°, swivels ±15°, rotates ±180°, spacing 16–28.5 inches

  • TypeMonitor Stand
  • Mount two screens on concrete or brick walls with the curved dual-arm design
  • Convert an existing single mount into a dual setup using the horizontal adapter plate
  • Supports two monitors up to 27 inch and 22 lbs each with VESA 75x75 to 100x100
  • Tilt ±45°, swivel ±15°, rotate ±180° for ergonomic positioning
  • Adjust screen spacing from 16 to 28.5 inch to match your workspace

Dual Monitor Wall Mount for 27 Inch Screens

The TAURKENAM dual arm mounts two displays up to 27 inches on concrete or brick walls. Each arm supports up to 22lbs and accepts VESA patterns of 75x75mm or 100x100mm. The curved design provides extended reach and flexible positioning for office workstations.

Concrete or Brick Wall Mounting Only

Installation is limited to solid concrete or brick surfaces; drywall or stud walls are not supported. When wall mounted, tilt and swivel ranges are more restricted than the full specifications suggest. The adjustable span between mounting plates ranges from 16 to 28.5 inches for horizontal alignment.

Converts Single Mount to Dual Setup

The horizontal adapter plate lets you upgrade an existing single monitor mount to a dual configuration, provided the original mount uses 75mm or 100mm hole spacing. It does not suit users needing more than two screens or those without a compatible base mount. The jump is worthwhile when desk space is scarce and a solid wall is available.

Highlights

  • Mount two screens on concrete or brick walls with the curved dual-arm design
  • Convert an existing single mount into a dual setup using the horizontal adapter plate
  • Supports two monitors up to 27 inch and 22 lbs each with VESA 75x75 to 100x100
  • Tilt ±45°, swivel ±15°, rotate ±180° for ergonomic positioning
  • Adjust screen spacing from 16 to 28.5 inch to match your workspace

Specifications

TypeMonitor Stand

Questions about this item

Should I choose the single-arm or dual-arm configuration for two 27 inch monitors?

This unit is a dual-arm kit that holds two screens up to 27 inches at 22lbs each, with VESA 75x75mm or 100x100mm patterns and 16 to 28.5 inch spacing between the mounting plates.

What does the 22lbs per arm rating mean when the mount is fixed to a concrete wall?

Each arm safely supports a monitor weighing up to 22lbs; the curved arm design gives a wide adjustment range, though tilt and swivel are more limited than on a desk clamp once the bracket is anchored to masonry.

How do the 75mm and 100mm VESA patterns affect which monitors I can attach?

The middle mounting plate accepts both 75x75mm and 100x100mm hole patterns, so any screen within the 27 inch and 22lbs limits that uses either standard VESA spacing will fit without an adapter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.