We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel dual monitor stand with two adjustable arms on a central pole, free standing base and grommet mount option

TAURKENAM

TAURKENAM Dual Monitor Stand 19-32 Inch VESA 75x75 100x100 22lb Free Standing Grommet

SKU CH-CJA5-SJPG0

Holds two 19–32 inch screens up to 22 lb each on VESA 75×75 or 100×100 mounts, with 80° tilt, 360° swivel, 15.5 in height travel and detachable plates for free-standing or grommet use

  • TypeMonitor Stand
  • Supports two 19 to 32 inch screens up to 22 lb each via VESA 75x75 or 100x100
  • Heavy-duty steel frame with integrated cable clips and choice of free-standing or grommet base
  • Tilt ±80°, full 360° swivel and independent 360° rotation for portrait or landscape use
  • Arms raise and lower 15.5 inches on centre pole for ergonomic height adjustment
  • Detachable VESA plates and included hardware enable quick monitor attachment and removal

Dual Monitor Stand for 19 to 32 Inch Screens

This free standing and grommet mount holds two displays from 19 to 32 inches using VESA 75x75mm or 100x100mm patterns. Each arm supports up to 22 pounds and suits typical office or home monitors. It is not suited for screens larger than 32 inches or heavier than 22 pounds per arm. Buyers needing support for ultra wide panels or triple monitor arrays should look elsewhere.

22lb Per Arm Capacity With 15.5 Inch Height Travel

The steel arms raise and lower 15.5 inches on the centre pole to match seated or standing eye levels. Tilt range reaches 80 degrees up and 80 degrees down while each screen rotates 360 degrees for independent portrait or landscape use. Swivel covers a full 360 degrees left to right. The 22 pound limit per arm means very large or heavy displays may exceed the safe working load.

Heavy Duty Steel Build With Interchangeable Bases

Heavy duty steel construction includes integrated cable management clips on each arm. Detachable VESA plates simplify monitor attachment before mounting to the stand. The package provides both a free standing base and a grommet clamp for desk through mounting. No wall mount option is included so permanent wall fixing is not possible.

Highlights

  • Supports two 19 to 32 inch screens up to 22 lb each via VESA 75x75 or 100x100
  • Heavy-duty steel frame with integrated cable clips and choice of free-standing or grommet base
  • Tilt ±80°, full 360° swivel and independent 360° rotation for portrait or landscape use
  • Arms raise and lower 15.5 inches on centre pole for ergonomic height adjustment
  • Detachable VESA plates and included hardware enable quick monitor attachment and removal

Specifications

TypeMonitor Stand

Questions about this item

Will the TAURKENAM stand hold my existing 24-inch 75x75 VESA monitor that weighs about 15 lbs?

Yes, each arm supports monitors from 19 to 32 inches with 75x75mm or 100x100mm VESA patterns up to 22 pounds, so a 24-inch 15-pound screen fits well within the limits.

How can I verify the 15.5-inch height range and 80-degree tilt are working correctly after assembly?

Measure from the desk to the VESA plate at its lowest and highest positions; the difference should be 15.5 inches. Tilt the monitor fully up and down — each extreme should reach 80 degrees from horizontal.

Does the package include both the free-standing base and the grommet clamp, or must I buy one separately?

Both the free-standing base and the grommet clamp are included and interchangeable; all mounting hardware, tools and instructions are also supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.