We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two silver articulated monitor arms on a desk clamp base with cable clips

TAURKENAM

TAURKENAM Dual Monitor Arm 24-32 in VESA 75/100 17.6 lb Mechanical Spring C-Clamp Grommet Office Equipment

SKU CH-3J3C-RE92K

Holds two 24 to 32 inch screens up to 17.6 lb each on spring arms with 90° tilt, 360° swivel and 17.5 in height range

  • TypeMonitor Stand
  • Supports two 24-32 inch screens up to 17.6 lb each via VESA 75/100
  • Mechanical spring counterbalance enables smooth 17.5 inch height adjustment with tension control
  • Full motion articulation: 90° tilt, 360° swivel for optimal ergonomic positioning
  • Quick-release VESA plates and integrated cable routing simplify setup and keep desk tidy
  • Choose C-clamp or grommet mount to fit your desktop securely

Dual monitor arm for 24–32 inch screens

This dual monitor arm supports two displays from 24 to 32 inches, each weighing up to 17.6 pounds. It mounts to desks using an interchangeable C-clamp or grommet base. The arms attach via 75x75 mm or 100x100 mm VESA patterns. It suits office workers who need two screens at ergonomic heights.

Mechanical spring arms with 17.5 inch height range

Counterbalanced mechanical springs let you raise or lower the arms through 17.5 inches of vertical travel. Tension is set with a hex bolt so screens stay in position. Each arm tilts 90 degrees up or down and swivels 360 degrees. The range covers seated and standing positions for most users.

Detachable VESA plates with cable management

VESA plates release with a push button and click back on for fast monitor swaps. Integrated cable channels route wires along the arms and pole. All mounting hardware, tools and instructions are included. Buyers who need more than two screens or screens heavier than 17.6 pounds each should choose a different mount.

Highlights

  • Supports two 24-32 inch screens up to 17.6 lb each via VESA 75/100
  • Mechanical spring counterbalance enables smooth 17.5 inch height adjustment with tension control
  • Full motion articulation: 90° tilt, 360° swivel for optimal ergonomic positioning
  • Quick-release VESA plates and integrated cable routing simplify setup and keep desk tidy
  • Choose C-clamp or grommet mount to fit your desktop securely

Specifications

TypeMonitor Stand

Questions about this item

Will the 17.6 lb mechanical spring arms hold my older 24 inch monitor that only has the 75x75mm VESA pattern?

Yes, each arm supports up to 17.6 lb and the detachable VESA plate fits both 75x75mm and 100x100mm patterns, so a 24 inch screen with the smaller pattern mounts directly.

How can I verify the counterbalance tension is set correctly after I mount two 27 inch screens?

Turn the hex bolt on top of each mechanical spring until the monitor stays in place when you let go; it should not drift up or down through the 17.5 inch height range.

Do I need to buy a separate C-clamp or grommet base, or are both included for my 30 inch deep desk?

The mount ships with an interchangeable base that works as either a C-clamp or a grommet mount, plus all hardware, tools and instructions — no extra parts required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.