We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A black USB Wi-Fi 6 adapter with two adjustable antennas and a 3.3 ft extension cable

TAURKENAM

TAURKENAM AX1800 USB Wi-Fi 6 Adapter Dual Band 1201Mbps 574Mbps 2 Antennas 3.3ft Cable

SKU CH-Q6M6-DFT8T

Adds WiFi 6 to Linux PCs and Raspberry Pi with dual-band 1201/574 Mbps, two antennas and a 3.3 ft USB 3.0 cable

  • TypeUSB Wi-FI Adapter
  • WiFi 6 speeds up to 1201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz
  • Broad Linux support including Ubuntu 16.04 to 22.10, Mint 18 to 21, Debian 8 to 11 and Raspberry Pi OS
  • Realtek RTL8832BU chipset with WPA3 encryption for secure connections
  • Two high-gain external antennas extend wireless range
  • 3 ft USB 3.0 extension cable allows flexible antenna placement

Linux WiFi 6 USB Adapter

The TAURKENAM AX1800 is a USB Wi-Fi 6 adapter built around the Realtek RTL8832BU chipset. It delivers dual-band wireless connectivity to PCs and Raspberry Pi units running Linux kernels up to 6.2, plus Windows 11 and 10. Two external antennas and a 3.3 ft USB 3.0 extension cable let users position the adapter for optimal signal reception.

Target Users and Limitations

This adapter suits Linux enthusiasts who need a straightforward way to add WiFi 6 to a desktop, laptop or single-board computer without internal card slots. It supports a wide range of distributions including Ubuntu 16.04 through 22.10, Mint 18 through 21, Debian 8 through 11, Raspberry Pi OS 8 through 11 and several others. Buyers whose kernel is newer than 6.2 or who require Bluetooth capability should look at a different solution.

Deciding Specification

The headline figure is the dual-band throughput: 1201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz, combining to the rated AX1800 class. If your workflow demands those speeds and your system matches the supported kernel and OS list, this adapter fits the requirement.

Highlights

  • WiFi 6 speeds up to 1201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz
  • Broad Linux support including Ubuntu 16.04 to 22.10, Mint 18 to 21, Debian 8 to 11 and Raspberry Pi OS
  • Realtek RTL8832BU chipset with WPA3 encryption for secure connections
  • Two high-gain external antennas extend wireless range
  • 3 ft USB 3.0 extension cable allows flexible antenna placement

Specifications

TypeUSB Wi-FI Adapter

Questions about this item

Does the USB 3.0 interface limit the 1201Mbps 5GHz rate?

USB 3.0 provides up to 5Gbps bandwidth, well above the adapter's 1201Mbps 5GHz link speed, so the interface does not cap real-world throughput.

What clearance do the two external antennas need?

Each high-gain antenna extends vertically from the adapter body; allow several centimetres above the USB port so they can pivot freely for best signal.

How is the driver installed on Ubuntu 22.10, and what step is often missed?

The Realtek RTL8832BU chipset requires an out-of-tree driver; after cloning the repository, run the DKMS install script so the module rebuilds automatically on kernel updates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.