We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular PoE splitter with Ethernet and DC ports

TAURKENAM

TAURKENAM 48V to 12V Waterproof PoE Splitter Adapter 10/100Mbps 18W White

SKU CH-F7E2-S8YFP

Converts 48 V PoE to 12 V DC at up to 18 W for IP cameras, VoIP phones or access points, with a waterproof one-piece housing and 10/100 Mbps data pass-through

  • TypeAccessories
  • Converts 48V PoE to 12V DC for non-PoE devices
  • Delivers up to 18W output at 1.5A for reliable operation
  • Waterproof one-piece moulded body withstands outdoor conditions
  • IEEE 802.3af compliant for broad equipment compatibility
  • 10/100Mbps data pass-through with standard 5.5×2.1mm DC jack

48 V to 12 V PoE Splitter for Outdoor Devices

This waterproof adapter converts 44 to 54 V PoE input into a regulated 12 V output up to 1.5 A. It delivers a maximum of 18 W to power IP cameras, VoIP phones or wireless access points that lack native PoE support. The one-piece injection-moulded housing protects the electronics in exposed locations.

Installers Running 10/100 Mbps Links to 12 V Gear

The splitter suits networks limited to 10 or 100 Mbps where the end device requires a 5.5 × 2.1 mm DC jack. It is not intended for gigabit backbones, nor for equipment that demands higher voltage or greater wattage than the 18 W ceiling. Buyers needing faster data rates or more power should look at alternative solutions.

Sustained 18 W Delivery in Sealed Enclosure

Under continuous load the unit maintains 12 V at up to 1.5 A while the sealed body dissipates heat without active cooling. Performance stays stable as long as the PoE source remains within the 44 to 54 V range and all cable glands are fitted correctly for outdoor use.

Highlights

  • Converts 48V PoE to 12V DC for non-PoE devices
  • Delivers up to 18W output at 1.5A for reliable operation
  • Waterproof one-piece moulded body withstands outdoor conditions
  • IEEE 802.3af compliant for broad equipment compatibility
  • 10/100Mbps data pass-through with standard 5.5×2.1mm DC jack

Specifications

TypeAccessories

Questions about this item

What PoE standard must my switch or injector support to power this splitter?

The splitter is fully IEEE 802.3af compliant, so any 48V source meeting that standard will work.

Will the 10/100Mbps data port slow down a Gigabit camera I already own?

Yes, the splitter passes data at 10/100Mbps only, so a Gigabit camera will negotiate down to 100Mbps.

How can I verify the splitter is delivering the correct 12V output after installation?

Measure the DC jack with a multimeter; it should read 12V at up to 1.5A when the PoE input is between 44V and 54V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.