Tapecase
Tapecase 15C572 2 in x 72 yd 3.3 mil Green Silicone Masking Tape
Green polyester film masking tape with silicone adhesive withstands 400 °F for high-temperature paint masking
- Withstands heat up to 400 °F for demanding masking jobs
- Silicone adhesive on polyester film gives clean release without residue
- 2 in width by 72 yd length covers large surfaces efficiently
- 3 mil thickness balances strength and conformability for tight curves
- Green colour provides high visibility during application and inspection
Green Silicone Masking Tape
Tapecase 15C572 is a high-temperature polyester film masking tape with a silicone adhesive. It is built for powder-coating, anodizing, and other finishing processes that reach elevated heat. The green backing provides clear visual identification on the production line. It suits shops that need clean removal after thermal cycles.
Polyester Film Backing and Silicone Adhesive
The 2 in wide by 72 yd long roll uses a 3.3 mil thick polyester film that resists tearing during application. Silicone adhesive maintains bond integrity up to 400 degrees F without leaving residue on metal or composite surfaces. The construction allows the tape to conform to irregular profiles while resisting flagging or lifting at the edges.
M Series Identification
The tape belongs to the Tapecase M Series line, which standardises the backing and adhesive formulation across widths. This consistency lets operators switch roll sizes without requalifying the masking process. The green colour codes the product for high-temperature silicone systems, reducing the risk of grabbing a lower-rated tape during changeovers.
Highlights
- Withstands heat up to 400 °F for demanding masking jobs
- Silicone adhesive on polyester film gives clean release without residue
- 2 in width by 72 yd length covers large surfaces efficiently
- 3 mil thickness balances strength and conformability for tight curves
- Green colour provides high visibility during application and inspection
Specifications
| Brand | TAPECASE |
|---|
Questions about this item
What does the 400 Degrees F rating mean for the silicone adhesive?
The silicone adhesive maintains bond strength up to 400 Degrees F, making the tape suitable for high-temperature masking such as powder-coating cure cycles.
Will the 2 in x 72 yd roll fit a standard hand-held tape dispenser?
The roll is 2 inches wide with a 3.3 mil polyester film backing; it fits most 2-inch core dispensers but check the core diameter before mounting.
How do I apply the tape so the silicone adhesive does not leave residue?
Apply to a clean, dry surface at room temperature, press firmly for full contact, and remove while the part is still warm but below 400 Degrees F to avoid adhesive transfer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
