Tapecase
Tapecase 15C568 Film Tape 1/2 in x 72 yd 3.3 mil Green Silicone
Green polyester film masking tape with silicone adhesive withstands temperatures up to 400 °F
- Withstands 400 °F for high-heat masking
- 72-yard roll covers large projects efficiently
- 3 mil thickness balances strength and conformability
- Silicone adhesive releases cleanly after curing
- Polyester film backing resists tearing during application
Green Silicone Film Tape 1/2 in x 72 yd
This TapeCase M Series masking tape uses a green polyester film backing with a silicone adhesive. It comes in a half-inch width and seventy-two-yard length at a 3.3 mil thickness. The tape is rated for performance up to 400 degrees Fahrenheit. It suits high-temperature masking jobs in automotive and industrial settings.
Polyester film backing and silicone adhesive
The polyester film provides dimensional stability during heat cycles while the silicone adhesive maintains bond strength at elevated temperatures. This combination resists adhesive transfer and allows clean removal after exposure to heat. The green colour aids visual identification on masked surfaces during processing.
For high-temp masking up to 400°F
Painters and fabricators needing a half-inch wide tape for powder coating, anodising or composite curing will find this roll suitable. Buyers who require a wider tape width, a different adhesive chemistry or a lower temperature rating should consider other options. The 72-yard length supports extended production runs without frequent roll changes.
Highlights
- Withstands 400 °F for high-heat masking
- 72-yard roll covers large projects efficiently
- 3 mil thickness balances strength and conformability
- Silicone adhesive releases cleanly after curing
- Polyester film backing resists tearing during application
Specifications
| Brand | TAPECASE |
|---|
Questions about this item
How often will the 3.3 mil polyester backing need replacing during repeated high-temperature masking cycles?
The tape is single-use; once removed after exposure up to 400 °F the silicone adhesive and polyester film cannot be reapplied, so a new roll is required for each masking job.
What limit appears first when the tape is held at its 400 °F maximum for extended periods?
The adhesive bond reaches its rated ceiling at 400 °F; beyond that temperature the silicone may degrade and lose holding power on the polyester backing.
Does the green silicone adhesive produce any odour or residue when the roll runs continuously in a 400 °F oven?
The silicone system is formulated for clean removal up to 400 °F with minimal off-gassing and no sticky residue left on the substrate after the tape is peeled away.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
