We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular label with black text reading Corrosive Solids N.O.S

Tape Logic

Tape Logic DL524P4 Corrosive Solids N.O.S. label 4x4 3/4 in

SKU CH-27ZV-XPHCR

A label marked "Corrosive Solids N.O.S." in black and white for hazard identification

  • TypeOffice & Shipping Electronics
  • ColorBlack/White
  • Identifies corrosive solids with clear N.O.S. marking
  • 4 x 4 3/4 inch label fits standard placards
  • Black on white print ensures high visibility
  • Tape Logic brand supplies consistent quality
  • Ships free on orders of 75 or more

Product Identity

Tape Logic DL524P4 labels display the required "Corrosive Solids, N.O.S." warning for regulatory compliance. They are intended for shippers and facilities that handle hazardous materials and need clear, standardised identification on packages.

Upgrade Context

These labels replace handwritten markings or generic stickers that may not meet transport regulations. The jump is worth it when audits or carrier inspections demand pre-printed, legible hazard communication that withstands handling.

Installation Notes

Each label applies by peeling the backing and pressing firmly onto a clean, dry surface. Misalignment or poor adhesion usually occurs when the package is dusty, wet or curved, so prepare the area before sticking.

Highlights

  • Identifies corrosive solids with clear N.O.S. marking
  • 4 x 4 3/4 inch label fits standard placards
  • Black on white print ensures high visibility
  • Tape Logic brand supplies consistent quality
  • Ships free on orders of 75 or more

Specifications

TypeOffice & Shipping Electronics
BrandTAPE LOGIC
ColorBlack/White

Questions about this item

What surface size does the 4 by 4 3/4 inch Corrosive Solids label need for full adhesion?

The label measures four inches by four and three-quarter inches, so the mounting surface should be at least that large and clean for full contact.

How is the label applied, and what step do users often skip?

Peel the backing, align the label on a dry surface, then press firmly across the entire face; skipping the firm press leaves edges loose.

When should the Corrosive Solids label be replaced?

Replace the label if the black print on white background fades, the edges lift, or the adhesive no longer holds after cleaning the container.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.