Tap Magic
Tap Magic 80017FL Cutting Fluid 17 oz Aerosol
Aerosol cutting fluid in a 17 oz can for drilling, milling, sawing and tapping
- 17 oz aerosol for easy application
- Amber cutting fluid for drilling and milling
- Suitable for tapping and sawing tasks
- New condition ready for immediate use
- 80017FL model for workshop lubrication needs
Tap Magic 80017FL Cutting Fluid
Tap Magic 80017FL Cutting Fluid is a 17 fl oz aerosol lubricant formulated for cutting, drilling, milling, sawing and tapping operations. The amber fluid reduces friction and heat at the tool-workpiece interface to extend tool life and improve surface finish. It is intended for machinists, maintenance technicians and fabricators who need a ready-to-use cutting oil for general-purpose metalworking tasks. The product ships new in a pressurised can for immediate application.
Thermals noise and power
The aerosol format delivers a consistent spray pattern that coats the cutting zone evenly, helping to dissipate heat generated during machining without the mess of flood coolant systems. Because the fluid is applied only where needed, there is no pump noise, no electrical draw and no reservoir to maintain. Normal use consists of short bursts directed at the tool, so ambient temperature and workshop noise levels remain unaffected by the lubricant itself.
Build quality and daily use
The 17 oz can is constructed from steel with a standard spray nozzle that resists clogging when the valve is cleared after each session. Amber colour lets the operator see coverage on the workpiece at a glance. The container is portable enough to keep at a bench or carry to a job site, and the pressured seal prevents leakage during storage. Users who require large-volume flood coolant or a non-aerosol delivery method will need a different system.
Highlights
- 17 oz aerosol for easy application
- Amber cutting fluid for drilling and milling
- Suitable for tapping and sawing tasks
- New condition ready for immediate use
- 80017FL model for workshop lubrication needs
Specifications
| Brand | TAP MAGIC |
|---|
Questions about this item
How do I apply the 17 oz aerosol to a tapping job without overspray?
Shake the can well, then spray a short burst directly onto the tap and workpiece before starting; the aerosol nozzle lets you target the cutting zone so excess fluid stays off surrounding surfaces.
When will the 17 oz can need replacing during daily shop use?
A 17 fl oz can typically lasts several weeks of regular cutting, drilling and milling; replace it when the spray becomes uneven or the fluid no longer coats the tool evenly.
What is the first limitation I hit during a long milling session with this fluid?
The 17 oz capacity runs out before heat buildup becomes an issue, so plan to have a spare can ready for extended milling runs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
