We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black studio monitor with 8 inch woofer and 1 inch tweeter front firing bass port

Tannoy

Tannoy Reveal 802 8" 2-Way 140W Active Studio Monitor

SKU CH-AEJ0-R51VM

Bi-amped 8-inch monitor with front-firing bass port delivers 42 Hz to 43 kHz response and 140 W total power

  • Wide frequency range from 42 Hz to 43 kHz for detailed mixes
  • Front-firing bass port extends low-frequency accuracy for critical listening
  • Bi-amplified 140W design with 75W LF and 25W HF drivers
  • Balanced XLR, 1/4" and 3.5 mm inputs suit many audio sources
  • Expansive sweet spot maintains stereo imaging across flexible workspaces

8" 2-Way 140W Bi-Amped Studio Monitor

The Tannoy Reveal 802 is an active studio monitor built for music production and critical listening. A custom 8-inch woofer and 1-inch tweeter are driven by a 140-watt bi-amplified module split into 75W low-frequency and 25W high-frequency sections. The tuned front-firing bass port extends low-end response down to 42 Hz while the crossover reaches 43 kHz. Dr Paul Mills tuned the active crossover for a wide sweet spot and accurate stereo imaging.

Connectivity Limited to Analogue Inputs

This monitor accepts balanced XLR, unbalanced 1/4-inch and 3.5 mm auxiliary connections only. No digital, optical or wireless interfaces are present, so the source device must provide an analogue line-level output. The included mini-jack cable enables the Aux Link feature for daisy-chaining a second speaker from a single source. Signal level and impedance matching remain the responsibility of the connected interface or mixer.

Check Analogue Output Availability Before Ordering

Verify that your audio interface, mixer or playback device offers XLR, 1/4-inch or 3.5 mm line outputs compatible with the monitor's input panel. Ensure your workspace can accommodate the physical dimensions of an 8-inch two-way cabinet and that mains power is available for the built-in amplification. Buyers requiring digital inputs, networked audio or passive operation should consider alternative solutions.

Highlights

  • Wide frequency range from 42 Hz to 43 kHz for detailed mixes
  • Front-firing bass port extends low-frequency accuracy for critical listening
  • Bi-amplified 140W design with 75W LF and 25W HF drivers
  • Balanced XLR, 1/4" and 3.5 mm inputs suit many audio sources
  • Expansive sweet spot maintains stereo imaging across flexible workspaces

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the 802 or a smaller Reveal model?

The 802 uses an 8 inch woofer and reaches 42 Hz, giving deeper bass than smaller models for full-range mixing.

What does the 140 W bi-amp rating deliver in my room?

It splits into 75 W for the woofer and 25 W for the tweeter, providing clean headroom at typical near-field listening distances.

Which inputs can I use and do they limit the signal?

Balanced XLR, unbalanced 1/4 inch and 3.5 mm mini-jack are all wired directly to the internal amps, so the analogue signal path stays unrestricted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.