Tadiran
Tadiran TL-5930/S 3.6V D 19 Ah Lithium Battery
3.6 V D-size lithium thionyl chloride cell delivering 19 Ah capacity with a 10-year shelf life and operation from -60 °C to +85 °C
- Battery Type33600
- 19 Ah capacity powers devices longer
- 10+ year shelf life keeps spares ready
- 60 °C to +85 °C operating range suits extremes
- 230 mA continuous and 500 mA pulse currents support steady and peak loads
Industrial D-Cell Lithium Thionyl Chloride
The Tadiran TL-5930/S is a 3.6V D-size primary cell delivering 19 Ah capacity for long-life industrial and remote-monitoring applications. It suits engineers who need stable voltage over years of unattended operation in harsh environments. Buyers seeking a rechargeable D-cell or a consumer alkaline replacement should select a different chemistry.
Voltage Match and Current Limits
Verify that the target device accepts a 3.6V lithium thionyl chloride cell and that its continuous draw stays below 230 mA with pulse peaks under 500 mA. Confirm the equipment fits a 33 mm diameter by 61.5 mm height button-top cell and operates within the -60°C to +85°C range. Do not mix this model with other battery types in series.
Direct Cross-Reference Replacements
The cell replaces Saft LSH20 and LS33600 units plus ER34615, ER34615H, ER34615C, ER34615M and ER32L615 references without wiring changes. Its 10-year shelf life and less than 1% annual self-discharge reduce spare-inventory rotation. No charger, holder or management electronics are bundled with the bare cell.
Highlights
- 19 Ah capacity powers devices longer
- 10+ year shelf life keeps spares ready
- 60 °C to +85 °C operating range suits extremes
- 230 mA continuous and 500 mA pulse currents support steady and peak loads
Specifications
| Battery Type | 33600 |
|---|
Questions about this item
What comes in the box with the Tadiran TL-5930/S and do I need a holder?
The box contains the single 3.6 V D-size lithium thionyl chloride cell with button-top termination. A separate battery holder or PCB mounting hardware is required for installation.
How do I choose between the LSH20 and LS33600 designations on the label?
Both codes refer to the same 19 Ah cell; LSH20 is the Saft reference while LS33600 is the Tadiran part number. Select the 19 Ah version when your device needs maximum capacity in D format.
What does the 230 mA continuous current rating mean for my meter or tracker?
The cell can supply up to 230 mA continuously and 500 mA in short pulses, so it suits low-power telemetry, metering or alarm circuits that draw steady microamp to milliamp loads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



