We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Tadiran

Tadiran TL-5930/F 3.6V D 19Ah lithium standard battery

SKU CH-C1JJ-KXE0D

D-size 3.6 V lithium thionyl chloride cell with 19 Ah capacity and wire-lead connector for long-life industrial use

  • Battery TypeTL-5930
  • 6 V high operating voltage stable through most of the application lifetime
  • 19 Ah capacity among the highest nominal capacities on the market today
  • 10+ year shelf life with less than 1% capacity loss after 1 year at 20°C
  • Wide operating range from -60°C to +85°C for extreme environments
  • Non-flammable inorganic electrolyte and low magnetic signature for safe reliable operation

Tadiran TL-5930/F 3.6V D 19Ah Lithium Battery

This Tadiran TL-5930/F is a primary lithium thionyl chloride cell in D size with a nominal voltage of 3.6V and a capacity of 19Ah. It features wire leads with a connector for direct integration into equipment. The chemistry delivers a shelf life exceeding 10 years and operates across a temperature range of -60°C to +85°C. It suits industrial and utility applications requiring long-term, maintenance-free power.

Ideal for long-life industrial monitoring

Engineers designing remote sensors, automatic meter reading units, or backup circuits that demand stable voltage over years will find this cell matches the requirement. Its low self-discharge rate of less than 1% per year at 20°C supports deployments where replacement is impractical. Buyers needing a rechargeable energy source or higher continuous current than 230mA should consider alternative chemistries. The non-rechargeable design also rules out cyclic applications.

19Ah capacity at 3.6V defines runtime

The 19Ah rating at 3.6V is the key figure for calculating how long the battery will power a given load. With a maximum recommended continuous current of 230mA and pulse capability of 500mA, the capacity suits low-drain devices operating for extended periods. Verify that the application's average and peak draw stay within these limits to achieve the expected service life.

Highlights

  • 6 V high operating voltage stable through most of the application lifetime
  • 19 Ah capacity among the highest nominal capacities on the market today
  • 10+ year shelf life with less than 1% capacity loss after 1 year at 20°C
  • Wide operating range from -60°C to +85°C for extreme environments
  • Non-flammable inorganic electrolyte and low magnetic signature for safe reliable operation

Specifications

Battery TypeTL-5930

Questions about this item

What voltage and capacity must my device support for this 3.6 V 19 Ah D-size cell?

The cell delivers a nominal 3.6 V and 19 Ah capacity; verify your equipment is rated for that voltage and can draw within the 230 mA continuous or 500 mA pulse limits.

Can I mix this Li-SOCl₂ D cell with older alkaline D cells in the same series string?

No — the supplier warns against using different battery models in series because the lithium thionyl chloride chemistry and 3.6 V nominal voltage differ from alkaline types.

How do I confirm the battery is healthy after connecting the wire-lead connector?

Measure open-circuit voltage near 3.6 V and verify the device operates within the 230 mA continuous or 500 mA pulse current ratings without voltage sag.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.