Taco Inc
Taco Inc 2400-10 1/10HP Flanged Circulating Pump
A hydronic circulating pump delivering 1/10 hp at 115V with a 23 ft shut-off head and best efficiency at 12 gpm and 17 ft head
- Delivers up to 18 GPM at 9.5 ft head for strong flow
- Best efficiency at 12 GPM and 17 ft head saves energy
- 1/10 HP motor runs on standard 115V single-phase power
- 23 ft shut-off head handles demanding closed-loop systems
- Durable cast iron housing with direct drive for long service life
Hydronic Circulating Pump 1/10 HP
The Taco 2400-10 is a flanged hydronic circulating pump built for closed-loop HVAC systems. It runs on single-phase 115V AC power with a direct-drive motor rated at 1/10 hp. The cast-iron housing handles fluid circulation in heating and cooling applications.
Flow Range 4 to 18 GPM
The pump delivers a maximum of 18 gpm at 9.5 ft of head and reaches best efficiency at 12 gpm at 17 ft. Minimum flow sits at 4 gpm at 22 ft, while the shut-off head is 23 ft. Flanged connections accept inlet and outlet sizes from 3/4 in to 1-1/2 in.
Direct-Drive Thermal Profile
The direct-drive design eliminates belt losses and reduces mechanical noise during operation. Cast-iron construction provides steady heat dissipation across the 6 3/8 in face-to-face dimension. Single-phase 115V draw keeps power consumption predictable for continuous hydronic duty.
Highlights
- Delivers up to 18 GPM at 9.5 ft head for strong flow
- Best efficiency at 12 GPM and 17 ft head saves energy
- 1/10 HP motor runs on standard 115V single-phase power
- 23 ft shut-off head handles demanding closed-loop systems
- Durable cast iron housing with direct drive for long service life
Specifications
| Brand | Taco |
|---|
Questions about this item
Will the 115V single-phase motor run on the same circuit as my existing 115V hydronic components?
Yes, the pump operates on 115V AC single-phase power, matching standard residential hydronic circuits.
How do I verify the pump is delivering flow within its 18 gpm @ 9.5 ft shut-off range after installation?
Measure the differential pressure across the flanges; at best efficiency the pump produces 12 gpm @ 17 ft and minimum flow is 4 gpm @ 22 ft.
Does the box include the 3/4 in to 1-1/2 in flanges or must I buy them separately?
Flanges are not included; the pump has a 6 3/8 in face-to-face dimension and requires separate flange kits for the 3/4 in to 1-1/2 in connections.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
