We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel hot water circulator pump with flange connections

Taco Inc

Taco Inc 009-SF5-IFC Trap 1/8 HP 115V 35 ft 10.5 GPM

SKU CH-ZAX8-FN6D1 MPN 009-SF5-IFC

A potable water circulating pump with a 1/8 hp motor, 115 V supply, 35 ft shut-off head and 10.5 GPM maximum flow

  • TypeDrain Components
  • Circulates hot water efficiently with 1/8 hp motor
  • Delivers up to 10.5 gpm flow at 1 ft head
  • Stainless steel housing resists corrosion in potable systems
  • Operates on standard 115V single-phase power
  • Provides 35 ft shut-off head for reliable pressure

Purpose and Audience

The Taco 009-SF5-IFC is a stainless-steel hot-water circulator pump rated at 1/8 HP for 115 V single-phase supply. It serves residential or light-commercial potable-water loops that need continuous flow without a dedicated return line.

Upgrade Context

This unit replaces an older circulator when the existing pump can no longer maintain the required head or flow. The jump is worth it when the system demands up to 35 ft of shut-off head and a best-efficiency point of 6 gpm at 18 ft.

Sustained Operation

Direct-drive construction and stainless-steel housing allow the pump to run continuously at its best-efficiency point of 6 gpm at 18 ft. Minimum flow remains 4 gpm at 25 ft, so performance stays stable during long duty cycles rather than dropping off after a short burst.

Highlights

  • Circulates hot water efficiently with 1/8 hp motor
  • Delivers up to 10.5 gpm flow at 1 ft head
  • Stainless steel housing resists corrosion in potable systems
  • Operates on standard 115V single-phase power
  • Provides 35 ft shut-off head for reliable pressure

Specifications

TypeDrain Components
BrandTaco
Model009-SF5-IFC

Questions about this item

What flange spacing and face-to-face length does the 009-SF5-IFC require for mounting?

The pump needs a 6 3/8 inch face-to-face dimension and a flanged connection style; flanges or unions are not included so they must be sourced separately.

How is the circulator wired and what common wiring mistake should be avoided?

It runs on single-phase 115 V AC; the frequent error is forgetting to provide a dedicated 115 V circuit and proper grounding for the 1/8 hp motor.

Which wearable component will need replacement and at what head-flow points should performance be checked?

The stainless-steel housing contains a direct-drive impeller and shaft seal that wear over time; verify flow at 10.5 gpm @ 1 ft, 6 gpm @ 18 ft and 4 gpm @ 25 ft to detect degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.