We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black 88mm square GPU cooling fans with 4-pin connectors side by side

SXDOOL

SXDOOL PLA09215B12H 12V 0.55A 88mm 15mm RTX 2080 VENTUS OC GPU fan pair

SKU CH-DFN4-FNE35 MPN PLA09215B12H

Replacement 88mm 12V 0.55A dual-fan set with 42mm mounting spacing for RTX 2080 VENTUS OC coolers

  • Replacement fans designed for MSI VENTUS OC models
  • 12 V, .55 A power draw keeps thermal limits in check
  • 88 mm diameter and 15 mm height fit the original shroud
  • 42 mm mounting-hole spacing matches factory screw layout
  • Dual 4-pin connectors (black and white) ensure PWM control

Replacement fans for MSI VENTUS OC cards

This pair of 88mm POWER LOGIC PLA09215B12H fans is built for MSI GeForce RTX 2080 Ti, RTX 2080 and RTX 2080 Super VENTUS OC models. Each unit runs on 12V at .55A and measures 88mm by 88mm by 15mm. The 4-pin connectors include one black and one white header for the card's fan controller.

Upgrade from worn or noisy original coolers

When the stock fans develop bearing rattle, reduced airflow or complete failure, this direct-fit set restores the cooler's original thermal performance. The jump is worth it if temperatures climb under load or the card throttles earlier than it used to. No heatsink or mounting screws are included in the package.

Verify dimensions and connector layout first

Measure the existing fan frame to confirm the 88mm square footprint and 15mm thickness before ordering. Check that the mounting-hole centres match the 42mm spacing and that the card uses the same dual 4-pin connector arrangement. Do not rely on the GPU model alone, as the same series can ship with different fan assemblies.

Highlights

  • Replacement fans designed for MSI VENTUS OC models
  • 12 V, .55 A power draw keeps thermal limits in check
  • 88 mm diameter and 15 mm height fit the original shroud
  • 42 mm mounting-hole spacing matches factory screw layout
  • Dual 4-pin connectors (black and white) ensure PWM control

Specifications

No published specifications for this item yet.

Questions about this item

Will the 88 mm by 15 mm frame with 42 mm hole centres fit my RTX 2080 VENTUS OC shroud?

The fans measure 88 mm square by 15 mm thick and the mounting holes sit on a 42 mm centre-to-centre grid; match those dimensions to your card before ordering.

Which way round do the black and white 4-pin connectors go on the RTX 2080 Ti VENTUS OC header?

One fan uses a black 4-pin plug and the other a white 4-pin plug; each plugs into its matching colour header on the card — do not swap them or the fans will not report speed correctly.

When should I expect to replace the sleeve-bearing pair in my RTX 2080 SUPER VENTUS?

Sleeve bearings in this 12 V 0.55 A class usually last several years of daily gaming; plan a swap once you hear a persistent rattle or see RPM drop under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.