We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SXDOOL replacement cooling fan for MSI graphics card, black plastic frame, 156x55x29mm, 40mm mounting holes

SXDOOL

SXDOOL GTX1650 Half-Height Knife Card Cooling Fan 156x55x29mm

SKU CH-SN5M-KWG07

Replacement cooling fan for MSI GTX1650 half-height graphics cards, measuring 156mm by 55mm by 29mm with a 40mm mounting hole spacing

  • Fits MSI half-height knife card GPU builds
  • 40 mm hole spacing matches original mounting points
  • 156 × 55 × 29 mm profile clears tight slots
  • Long-type fan design suits specific card layout
  • Verify all parameters before ordering for correct fit

Replacement Cooling Fan

This replacement cooling fan is designed for the MSI GTX1650 half-height knife card graphics board. It measures 156mm x 55mm x 29mm and features a 40mm hole distance for mounting. The unit is supplied new and matches the long variant among the three types of graphics card fans identified by the supplier.

Compatibility Check Required

This part suits owners of the specific MSI half-height knife card who need to replace a worn or noisy cooler. Builders with a different GTX1650 model, a full-height card, or a different hole spacing should look at another fan because the mounting holes and shroud dimensions will not align.

Critical Mounting Specification

The 40mm hole distance is the single specification that decides whether this fan fits the graphics card. Verify this measurement against the original cooler before ordering to avoid a mismatch that would prevent installation.

Highlights

  • Fits MSI half-height knife card GPU builds
  • 40 mm hole spacing matches original mounting points
  • 156 × 55 × 29 mm profile clears tight slots
  • Long-type fan design suits specific card layout
  • Verify all parameters before ordering for correct fit

Specifications

No published specifications for this item yet.

Questions about this item

Will this 156mm x 55mm x 29mm fan match the 40mm hole spacing on my MSI half-height knife card?

The replacement fan measures 156mm x 55mm x 29mm with a 40mm mounting hole distance, matching the long variant for MSI half-height knife cards.

How can I verify the fan is operating correctly once installed?

After fitting, power on the system and confirm the fan spins smoothly at idle and ramps up under GPU load without unusual noise or vibration.

Does the package include mounting screws or a power cable, or must I source them separately?

The box contains only the 156mm x 55mm x 29mm cooling fan; screws and any required power connectors are not included and must be obtained separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.