We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 85mm graphics card cooling fan with 35mm mounting holes

SXDOOL

SXDOOL 85mm Fan T129215SU 12V 0.50A 3600rpm 35mm Hole

SKU CH-P0TJ-K4G2K

Replacement 85 mm graphics-card fan with EBR hydraulic bearing, 35 mm mounting holes, 12 V 0.50 A supply and 0-3600 rpm temperature-controlled speed

  • Cools ASUS ROG STRIX models including 2060, 2070, 2080 and 5700 series cards
  • EBR hydraulic bearing reduces friction for quieter, longer-lasting operation
  • 85 mm diameter fits the original mounting pattern exactly
  • 35 mm hole spacing matches the stock cooler screw layout
  • Smart 0-3600 rpm curve stops the fan at idle and scales with temperature

85 mm replacement fan for ASUS ROG STRIX graphics

This replacement fan fits ASUS ROG STRIX models using the 2060, 2070S, 2080Ti or RX5700XT GPUs. It uses the EVERFLOW T129215SU model with an EBR hydraulic bearing. The fan runs on a 12 V supply drawing 0.50 A.

Suitable for owners repairing a compatible ASUS

This part suits owners who need a direct replacement for a failed or noisy original fan on the listed cards. It is not for builders fitting a different brand of graphics card or a cooler with a different mounting hole pattern. Buyers who need a different voltage, connector or hole spacing should look elsewhere.

35 mm mounting hole spacing decides fit

The critical specification is the 35 mm distance between mounting holes, which must match the original cooler shroud exactly. The 85 mm diameter, 12 V 0.50 A rating and 0 to 3600 rpm temperature-controlled speed range are fixed by the T129215SU design. Verify the hole spacing before ordering.

Highlights

  • Cools ASUS ROG STRIX models including 2060, 2070, 2080 and 5700 series cards
  • EBR hydraulic bearing reduces friction for quieter, longer-lasting operation
  • 85 mm diameter fits the original mounting pattern exactly
  • 35 mm hole spacing matches the stock cooler screw layout
  • Smart 0-3600 rpm curve stops the fan at idle and scales with temperature

Specifications

No published specifications for this item yet.

Questions about this item

Which graphics cards does the 85 mm T129215SU fan replace?

The fan is listed for ASUS ROG STRIX models including 2060, 2070S, 2080Ti and RX5700XT cards.

Will the 35 mm mounting holes line up with my existing cooler shroud?

Yes, the fan uses a 35 mm hole spacing that matches the original cooler mounting pattern.

How can I confirm the fan is running correctly after installation?

The fan spins from 0 to 3600 rpm with automatic start and stop controlled by the card's temperature sensor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.