We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 47mm graphics card cooling fan with 39mm mounting holes

SXDOOL

SXDOOL 125010-SL2ZP / 125010-SL1ZP 12V .08A 47mm 39mm graphics card fan

SKU CH-8817-SF2XV

A 47 mm graphics-card fan with 39 mm hole spacing, 12 V 0.08 A rating and a 2-wire 2-pin connector

  • Original 125010-SL2ZP / 125010-SL1ZP model ensures exact fit
  • 12 V .08 A rating matches stock power draw
  • 47 mm diameter with 39 mm hole pitch aligns mounting holes
  • 2-wire 2-pin connector plugs straight onto board
  • New condition guarantees full performance from day one

Replacement fan for specific graphics cards

This SXDOOL fan matches the 125010-SL2ZP and 125010-SL1ZP part numbers used on certain graphics cards. It operates on a 12 V supply drawing 0.08 A through a standard 2-wire 2-pin connector. The unit is intended for repairers or owners replacing a worn or noisy original cooler.

Thermals noise and power in normal use

The fan runs directly from the card's 12 V header at a rated 0.08 A, keeping electrical load minimal. Its 47 mm diameter and 39 mm mounting pitch replicate the original airflow path without modification. Acoustic output will depend on the host card's fan curve and thermal load.

Mounting hardware and connector details

The package supplies the fan unit itself with the correct 2-pin plug for direct connection. No additional screws, cables or control software are included. Installers must verify the 39 mm hole spacing and 47 mm frame size against the existing heatsink before fitting.

Highlights

  • Original 125010-SL2ZP / 125010-SL1ZP model ensures exact fit
  • 12 V .08 A rating matches stock power draw
  • 47 mm diameter with 39 mm hole pitch aligns mounting holes
  • 2-wire 2-pin connector plugs straight onto board
  • New condition guarantees full performance from day one

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 125010-SL2ZP fan and which step is often missed?

Align the 39 mm hole pitch with the graphics card shroud, secure the four screws, then connect the 2-wire 2-pin plug to the 12 V header; the step most often missed is plugging the 2-pin connector back onto the board.

What maintenance will the 125010-SL1ZP fan need later?

Periodically blow dust from the 47 mm blades with compressed air and listen for bearing noise; if the .08 A motor becomes loud or stops spinning, replace the whole fan unit.

What limit appears first when the 12 V .08 A fan runs continuously?

The sleeve-bearing motor is the first limit under sustained use; once the lubricant dries the fan slows or stalls, requiring a full replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.