We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic case holding bare copper butt splice terminals and adhesive-lined heat shrink tubes

SVAAR 132PCS Butt Splice Kit 4/6/8/12-10 AWG 66 Terminals 66 Heat Shrink

SKU CH-BW4K-AAQJC

A 132-piece kit supplying 66 bare copper butt splices for 4 to 12 AWG wire and 66 adhesive-lined heat-shrink tubes rated at 600 volts

  • ColorBlack
  • Standards/CertificationsUL Listed
  • 132-piece kit covers 12-10 AWG to 4 AWG with 66 pure copper terminals and 66 heat-shrink tubes
  • UL-listed components meet recognised safety standards for automotive, marine and DIY wiring
  • Seamless bare copper barrels deliver maximum conductivity and crimp strength for reliable power transfer
  • 3:1 dual-wall adhesive heat shrink creates a hermetic seal that resists corrosion and moisture
  • 100% annealed electrolytic copper ensures durable, malleable crimps that hold tight over time

SVAAR 132-piece butt splice kit

This kit contains 66 uninsulated butt terminals and 66 pieces of 3:1 adhesive-lined heat shrink tubing. Terminals are made from seamless bare pure copper and cover four wire gauges from 4 AWG to 12-10 AWG. The UL Listed components suit automotive, marine and general DIY wiring tasks where a sealed crimp connection is required.

Check wire gauge and crimp tool before ordering

The assortment includes 30 terminals for 12-10 AWG, 20 for 8 AWG, 10 for 6 AWG and 6 for 4 AWG. Verify that your existing wiring falls within these sizes and that you have a suitable crimping tool for uninsulated copper splices. A heat source such as a heat gun is also needed to activate the adhesive-lined tubing.

Suits installers needing multiple gauge coverage

Electricians and hobbyists who work across 4 to 12-10 AWG will appreciate the single-kit convenience. Users who only need one specific gauge or prefer pre-insulated connectors should look at a dedicated pack instead.

Highlights

  • 132-piece kit covers 12-10 AWG to 4 AWG with 66 pure copper terminals and 66 heat-shrink tubes
  • UL-listed components meet recognised safety standards for automotive, marine and DIY wiring
  • Seamless bare copper barrels deliver maximum conductivity and crimp strength for reliable power transfer
  • 3:1 dual-wall adhesive heat shrink creates a hermetic seal that resists corrosion and moisture
  • 100% annealed electrolytic copper ensures durable, malleable crimps that hold tight over time

Specifications

ColorBlack
Standards/CertificationsUL Listed

Questions about this item

What comes in the 132-piece kit and what else is needed?

The kit contains 66 bare pure copper butt splices (30×12-10 AWG, 20×8 AWG, 10×6 AWG, 6×4 AWG) plus 66 pieces of 3:1 adhesive-lined heat-shrink tubing rated for 600 Volts. A crimp tool and heat source are required but not included.

How do I choose between the four wire-gauge sizes in the kit?

Match the splice to the wire gauge you are joining: use the 12-10 AWG splices (30 pcs) for 12-10 AWG wire, 8 AWG splices (20 pcs) for 8 AWG wire, 6 AWG splices (10 pcs) for 6 AWG wire, and 4 AWG splices (6 pcs) for 4 AWG wire.

What does the 600 Volt rating on the heat-shrink tubing mean in practice?

The 3:1 dual-wall adhesive tubing is UL Listed for 600 Volts, so when shrunk over a properly crimped splice it provides an insulated, hermetic seal rated for circuits up to 600 Volts in automotive, marine or general wiring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.