We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black alloy steel desktop speaker stands with square trays and four height settings

Suptek SDM001T speaker stand, 9.6 x 8.8 in tray, 8.7–14.2 in height, tilt, 33 lb, 2 pack, black

SKU CH-0NXB-PE5AK

A pair of alloy-steel desktop stands with 9.6 x 8.8 in trays that adjust from 8.7 to 14.2 in high and tilt ±12°, each holding 33 lb

  • FinishBlack
  • MaterialsAlloy Steel
  • Length8.8 L x 25.8 W x 28 H centimeters
  • SpecificationAlloy Steel, Black, 36 centimeters, 33 pound, 9.6 L x 9.6 W
  • FeatureAlloy Steel
  • Dimension2.4 in x 3.96 in x 1.3 in
  • Elevate speakers to ear level with four height settings from 8.7 to 14.2 inches
  • Angle sound precisely using ±12° tilt adjustment for optimal listening position
  • Support heavy monitors up to 33 lb each on sturdy alloy-steel platforms
  • Free up desk space by raising speakers off the surface
  • Ready-to-use pair includes all mounting hardware for immediate setup

Universal desktop speaker stands

The Suptek SDM001T set includes two free-standing alloy-steel stands finished in black. Each stand provides a 9.6 by 8.8 inch platform rated for up to 33 pounds, suitable for bookshelf or computer speakers. The stands raise monitors toward ear level and free desk space for other equipment.

Four lock heights and tilt tray

Height adjusts in four fixed steps at 8.7, 10.5, 12.4 and 14.2 inches measured to the desk, selected by a locking pole. The tray then tilts from plus 12 degrees to minus 12 degrees for angled projection. All mounting hardware and a user manual are supplied; no clamping or wall fixing is required.

Ideal for desktop monitor pairs

Works well for stereo pairs of bookshelf or powered speakers on a desk or shelf where a stable, movable base is preferred. Less suited for buyers who need a single taller floor stand, a clamp mount for thick desks, or a wall-mount solution for permanent installation.

Highlights

  • Elevate speakers to ear level with four height settings from 8.7 to 14.2 inches
  • Angle sound precisely using ±12° tilt adjustment for optimal listening position
  • Support heavy monitors up to 33 lb each on sturdy alloy-steel platforms
  • Free up desk space by raising speakers off the surface
  • Ready-to-use pair includes all mounting hardware for immediate setup

Specifications

Brandsuptek
ModelSDM001T
Part NumberSDM001T
FinishBlack
MaterialsAlloy Steel
Length8.8 L x 25.8 W x 28 H centimeters
SpecificationAlloy Steel, Black, 36 centimeters, 33 pound, 9.6 L x 9.6 W x 14.2 H inches, SDM001T
FeatureAlloy Steel
Dimension2.4 in x 3.96 in x 1.3 in

Questions about this item

How do I verify the Suptek SDM001T stands are stable at the chosen height after assembly?

Lock the pole into one of the four height stops at 8.7, 10.5, 12.4 or 14.2 inches, set the tray tilt between +12° and -12°, then place a speaker up to 33 lb on each tray; the alloy-steel base should not wobble on the desk.

What hardware is included in the 2-pack box and what must I source myself?

The package contains two speaker stands, all mounting hardware and a user manual; no speaker cables, isolation pads or additional brackets are supplied.

Which Suptek desktop stand model should I choose if I need tilt adjustment and a 33 lb capacity per stand?

Select the SDM001T; it provides the 9.6 x 8.8 inch tray, four height positions from 8.7 to 14.2 inches and ±12° tilt, while the SDM001G and SDM001 lack tilt and the SFM001 and SPM201 are floor or wall mounts with different capacities.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.