We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black alloy-steel clamp-on speaker stands with square trays and height-adjustable poles

Suptek SDM001G Clamp-on Speaker Stand 2-Pack Black 9.6x8.8in 51lb

SKU CH-EXD1-AAWFZ

Clamp-on speaker stands with 9.6 x 8.8 in trays hold 51 lb each and adjust to four heights from 8.8 to 14.2 in

  • FinishBlack
  • MaterialsAlloy Steel
  • Length7.7 L x 23.5 W x 24.4 H centimeters
  • SpecificationAlloy Steel, Black, 14.2 inches, 51 pounds, 9.6 L x 8.8 W x
  • Sports Team1 Piece
  • FeatureAlloy Steel
  • Height adjustable to four locked positions from 8.8 to 14.2 inches for optimal speaker placement
  • Supports up to 51 lbs per stand with alloy steel construction for stable monitoring
  • Clamps securely to desks up to 2.6 inches thick without permanent mounting
  • 360-degree swivel platform enables precise aiming toward the listening position
  • Two stands included with 9.6 by 8.8 inch trays to elevate bookshelf speakers off the desktop

Two-pack clamp speaker stands for desktop audio

This two-pack of Suptek SDM001G clamp-on stands holds bookshelf speakers, studio monitors, laptops or projectors on a desk. Each stand supports up to 51 lb on a 9.6 x 8.8 in alloy-steel tray. The C-clamp grips surfaces up to 2.6 in thick for a wobble-free fit.

Adjustable height and 360° swivel tray

Four locking pole positions set the tray at 8.8, 10.7, 12.5 or 14.2 in above the desk to align tweeters with ear level. The tray rotates a full 360° so speakers can be angled toward the listening position without moving the clamp base.

Simple C-clamp install with included hardware

All mounting hardware and a user manual ship in the box. Tighten the clamp firmly on desks up to 2.6 in thick; thinner tops may need extra padding to prevent marring. The 3.08 kg steel build resists flex, but very thick or curved edges can limit clamp engagement.

Highlights

  • Height adjustable to four locked positions from 8.8 to 14.2 inches for optimal speaker placement
  • Supports up to 51 lbs per stand with alloy steel construction for stable monitoring
  • Clamps securely to desks up to 2.6 inches thick without permanent mounting
  • 360-degree swivel platform enables precise aiming toward the listening position
  • Two stands included with 9.6 by 8.8 inch trays to elevate bookshelf speakers off the desktop

Specifications

Brandsuptek
ModelSDM001
FinishBlack
MaterialsAlloy Steel
Length7.7 L x 23.5 W x 24.4 H centimeters
SpecificationAlloy Steel, Black, 14.2 inches, 51 pounds, 9.6 L x 8.8 W x 14.2 H inches, SDM001
Sports Team1 Piece
FeatureAlloy Steel
Dimension9.6 in x 8.8 in x 14.2 in
Weight3.08 kilograms

Questions about this item

Will the C-clamp mounting hardware need tightening over time?

The sturdy C-clamp fits desks up to 2.6 inches thick for a wobble-free setup; periodic re-tightening of the clamp screw may be needed if the desk surface compresses or shifts.

What limits the maximum speaker weight the stand can hold safely?

Each stand supports up to 51 lbs; exceeding this capacity risks structural failure of the alloy steel pole or clamp mechanism.

Does the steel construction transfer vibration or heat to the desk during all-day use?

The alloy steel frame and 9.6 x 8.8 inch platform provide rigid support with no moving parts that generate heat; vibration transfer depends on speaker isolation pads, which are not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.