Superior Tool
Superior Tool 2750 Water/Gas Shutoff Wrench Steel 12 in 15 in
Shuts off gas and water at the source with self-adjusting steel jaws fitting four valve sizes in 12 in and 15 in lengths
- TypeAdjustable Wrenches
- MaterialSteel
- Turns off gas and water at the source
- Self-adjusting fit for four valve diameters 1 1/4 in, 1 1/8 in, 3/8 in, 5/8 in
- Dual-length steel handle provides 12 in and 15 in leverage
- Works on standard gas meter and water shutoff valves
- Alloy steel construction resists corrosion and wear
Superior Tool 2750 Shutoff Wrench
The Superior Tool 2750 is a steel water and gas shutoff wrench designed for utility professionals and maintenance crews. It operates standard gas meter and water shutoff valves at the source with a self-adjusting mechanism. The tool is available in 12 in and 15 in overall lengths for reach flexibility.
Self-Adjusting Valve Compatibility
The self-adjusting design fits inside diameters of 1 1/4 in, 1 1/8 in, 3/8 in, and 5/8 in without manual adjustment. Alloy steel construction withstands the torque required for emergency shutoff situations. The fixed 1 1/2 in overall diameter matches standard valve housings.
Verify Valve Dimensions Before Purchase
Confirm your gas meter or water valve inside diameter matches one of the four listed sizes before ordering. This wrench is not adjustable and will not fit valves outside the specified range. Buyers needing a universal adjustable wrench or different length options should consider other tool types.
Highlights
- Turns off gas and water at the source
- Self-adjusting fit for four valve diameters 1 1/4 in, 1 1/8 in, 3/8 in, 5/8 in
- Dual-length steel handle provides 12 in and 15 in leverage
- Works on standard gas meter and water shutoff valves
- Alloy steel construction resists corrosion and wear
Specifications
| Brand | SUPERIOR TOOL |
|---|---|
| Type | Adjustable Wrenches |
| Material | Steel |
Questions about this item
Will the steel jaws or the self-adjusting mechanism need replacement after heavy use?
The wrench is made from alloy steel with no adjustable parts; the self-adjusting action relies on the fixed jaw geometry, so there are no separate components to wear out or replace.
What stops the wrench from slipping when I apply maximum torque on a stuck valve?
The fixed 1 1/2 in overall diameter and the four inside-diameter settings (1 1/4 in, 1 1/8 in, 3/8 in, 5/8 in) give a positive fit on standard gas and water shutoff nuts, limiting slip before the steel yields.
Does the 12 in or 15 in length make the tool heavy or tiring during a full day of shutoff work?
The all-steel construction adds noticeable weight at either length, but the long handle multiplies leverage so less force is needed, reducing fatigue during repeated valve turns.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
