We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal Mini SAS HD SFF-8643 to four SATA breakout cable, woven mesh sheath, locking latches

SUNRISE MEDICAL

SUNRISE MEDICAL Internal Mini SAS HD to SATA SFF8643 33 Feet 1m Pro Sound

SKU CH-Y77X-VHR14

Connects a 12 Gbps SFF-8643 host to four SATA drives with 33-foot equal-length fan-out cables and locking latches

  • TypeAmplifiers
  • Connects 12 Gbps RAID controllers to four SATA drives via SFF-8643
  • 36-pin Mini SAS HD fans out to four 7-pin SATA connectors
  • Supports SATA I, II, III drives at 3 Gbps and 6 Gbps speeds
  • 30 AWG flat ribbon in woven mesh sheath with locking latches
  • 33 ft 1 m length fits 2.5" and 3.5" drives in dense builds

Internal SAS HD to SATA Breakout Cable

The SUNRISE MEDICAL Internal Mini SAS HD to SATA SFF8643 cable connects a 12 Gbps host bus adapter or RAID controller with an SFF-8643 port to four discrete SATA drives. It provides reliable internal connectivity for migrating from 6 Gbps to 12 Gbps storage area network systems. The forward fan-out design uses a 36-pin SFF-8643 host connector and four 7-pin SATA target connectors with stainless steel latches.

Suits builders adding SATA drives to a RAID

This cable suits builders who need to connect up to four 2.5" or 3.5" SATA I, II, or III hard drives to a compatible high-density RAID controller such as the Adaptec 71605 or 789. It is not for systems lacking an internal SFF-8643 host port or for installations requiring a different connector pin count. A separate 4-port SATA power splitter is needed to supply drive power.

36-pin SFF-8643 host connector with four SATA lanes

The single specification that decides fit is the 36-pin SFF-8643 male host connector with latch, which breaks out to four 7-pin female SATA receptacles with latches. Each of the four channels carries high-speed SATA traffic over 30 AWG Style 207044 flat ribbon wire inside a woven mesh sheath. The assembly is RoHS compliant and backed by a limited lifetime warranty.

Highlights

  • Connects 12 Gbps RAID controllers to four SATA drives via SFF-8643
  • 36-pin Mini SAS HD fans out to four 7-pin SATA connectors
  • Supports SATA I, II, III drives at 3 Gbps and 6 Gbps speeds
  • 30 AWG flat ribbon in woven mesh sheath with locking latches
  • 33 ft 1 m length fits 2.5" and 3.5" drives in dense builds

Specifications

TypeAmplifiers

Questions about this item

What speed does the SFF-8643 interface support on this cable?

The SFF-8643 connector is designed for 12 Gbps host bus adapters or RAID controllers while maintaining 3 Gbps and 6 Gbps SATA drive compatibility.

What are the exact connector types and counts on this breakout cable?

One 36-pin HD Mini-SAS SFF-8643 male with latch connects to four 7-pin SATA female receptacles with latches.

How do you attach the drives and avoid the common power mistake?

Plug the SFF-8643 end into the controller and the four SATA ends into 2.5 or 3.5 drives; add a separate 4-port SATA power splitter because this cable carries data only.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.