Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.0098938BTC
In stock
Sunbeam
Sunbeam BC-0903 charger with 4 AA 2600 mAh NiMH batteries
Charges 2 or 4 AA or AAA NiMH/NiCd cells in 1.5–3.5 hours with microprocessor control, safety cut-offs and included car and USB cords, plus four 2600 mAh AA batteries
- Battery TypeBatteries & Chargers
- Charges 2 or 4 AA and AAA cells together
- Microprocessor control stops charging when batteries reach full capacity
- Includes 12 V car cord and USB cable for mobile power
- Four 2600 mAh NiMH batteries deliver up to 1000 recharge cycles
- Red and green LEDs show charging status at a glance
Charger for AA and AAA NiMH cells
The Sunbeam BC-0903 charges two or four AA and AAA NiMH or NiCd batteries at once. It runs from 120 V to 240 V mains, a 12 V car socket or a USB port. A microprocessor controls the charge and stops at negative delta V detection. Red and green LEDs show the charging status.
Suits households with mixed AA and AAA devices
Users who need to charge both AA and AAA cells in the same session are covered. The unit only accepts cylindrical NiMH or NiCd chemistries, so devices that require lithium-ion, lithium primary or 9 V blocks cannot be charged here. Buyers who want more storage or simultaneous charging beyond four cells should look at something else.
Four AccuLoop-X AA cells rated at 2600 mAh
The included batteries deliver 1.2 V and 2600 mAh each, with a claimed cycle life of up to 1000 recharges. They exhibit no memory effect and hold charge while stored. This capacity decides whether the pack matches the runtime needs of your high-drain devices.
Highlights
- Charges 2 or 4 AA and AAA cells together
- Microprocessor control stops charging when batteries reach full capacity
- Includes 12 V car cord and USB cable for mobile power
- Four 2600 mAh NiMH batteries deliver up to 1000 recharge cycles
- Red and green LEDs show charging status at a glance
Specifications
| Battery Type | Batteries & Chargers |
|---|
Questions about this item
How do I install the BC-0903 charger and what step is often missed?
Plug the charger into a 120V-240V 50/60Hz outlet, insert two or four AA or AAA NiMH or NiCd cells matching the polarity markings, and ensure the correct number of batteries is used so the microprocessor detects them properly.
What maintenance or replacement will the included AccuLoop-X AA batteries need later?
The 2600 mAh NiMH cells are rated for up to 1000 recharge cycles with no memory effect; replace them when run-time drops noticeably after a full 2-3.5 hour charge.
What limit appears first during sustained charging sessions?
The safety timer activates to prevent overcharge, stopping the 900 mA AA or 500 mA AAA output once the negative delta V cut-off detects full charge.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
