Suburban
Suburban B-123-H1-M Tri-Blocks gauge pair 1 in x 2 in x 3 in
A pair of hardened-steel tri-block gauges with 0.0001 in squareness and ±0.0002 in tolerance, supplied in a wooden case
- TypeMicrometers
- Precision alignment with 0.0001 in squareness tolerance
- Reliable parallelism held to 200 micron across blocks
- Tight dimensional control within +/- 0.0002 in tolerance
- Secure mounting via 5/16-18 tapped holes in each block
- Protected storage and transport in included wooden case
Tri-Block Pair for Inspection
The Suburban B-123-H1-M Tri-Block gauge pair consists of two hardened steel blocks sized 1 in x 2 in x 3 in. They are built for machinists and quality technicians who need a reference standard for checking squareness and parallelism on surface plates or during layout work.
Wooden Case and Tapped Holes
Each block includes a 5/16 in - 18 tapped hole for secure mounting or fixturing during measurement routines. The pair ships in a fitted wooden case that protects the finished faces and keeps the blocks together when not in use.
Squareness and Parallelism Tolerances
The set delivers squareness within 0.0001 in and parallelism within 200 micron in, with an overall tolerance of +/- 0.0002 in. These limits suit precision setup and inspection tasks but do not replace a calibrated gauge block set for higher-order metrology.
Highlights
- Precision alignment with 0.0001 in squareness tolerance
- Reliable parallelism held to 200 micron across blocks
- Tight dimensional control within +/- 0.0002 in tolerance
- Secure mounting via 5/16-18 tapped holes in each block
- Protected storage and transport in included wooden case
Specifications
| Brand | SUBURBAN |
|---|---|
| Type | Micrometers |
Questions about this item
How do I verify the Tri-Blocks meet the 0.0001 in squareness spec after setup?
Use a calibrated surface plate and indicator to measure squareness across the 3 in length; the pair should read within 0.0001 in.
What comes in the wooden case and what must I source separately?
The case holds the 1 in x 2 in x 3 in steel pair with 5/16-18 tapped holes; no calibration certificate or mounting hardware is included.
Which tolerance grade suits inspection versus layout work?
The +/- 0.0002 in tolerance with 200 micron parallelism fits precision inspection; choose a looser grade only for rough layout.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
