Streamline
Streamline 61420301 HVAC Control 30 Ft
A 30-foot copper refrigerant line set with insulated suction line for air conditioning and refrigeration systems
- ColorTransparent
- 30 ft length covers extended runs in HVAC installations
- Copper construction provides reliable refrigerant flow and corrosion resistance
- 1/2 in insulation on suction line reduces thermal loss during operation
- 3/8 in liquid line and 7/8 in suction line suit standard AC and refrigeration systems
- Ready-to-install roll simplifies setup for professional technicians
Streamline 61420301 HVAC Refrigerant Line Set
This 30-foot copper roll provides liquid and suction lines for air conditioning and refrigeration installations. It suits HVAC technicians and installers who need a single package for new system hookups or line replacements.
Copper construction with half-inch insulation
The transparent roll delivers a 3/8-inch O.D. liquid line and a 7/8-inch O.D. suction line pre-insulated for thermal protection. Copper resists corrosion and handles system pressures while the insulation reduces condensation and energy loss during daily operation.
Verify your system line sizes and length requirement
Confirm the equipment calls for 3/8-inch liquid and 7/8-inch suction diameters before ordering. Ensure the 30-foot length covers the run between indoor and outdoor units without excess. Check local codes for any additional insulation or support mandates.
Highlights
- 30 ft length covers extended runs in HVAC installations
- Copper construction provides reliable refrigerant flow and corrosion resistance
- 1/2 in insulation on suction line reduces thermal loss during operation
- 3/8 in liquid line and 7/8 in suction line suit standard AC and refrigeration systems
- Ready-to-install roll simplifies setup for professional technicians
Specifications
| Brand | STREAMLINE |
|---|---|
| Color | Transparent |
Questions about this item
What O.D. sizes do the 30 Ft liquid and suction lines use?
The liquid line is 3/8 in O.D. and the suction line is 7/8 in O.D., both supplied as a 30 Ft copper roll.
What insulation does the roll include and how thick is it?
Insulation is provided on the suction line only, with a 1/2 in wall thickness; the liquid line is uninsulated.
How should the pre-insulated suction line be joined without creating a cold bridge?
Slide the factory insulation back, braze the 7/8 in O.D. copper joint, then reseal the insulation gap with vapour-barrier tape or glue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
