Streamline
Streamline 61020500 hvac control 50 ft
Copper refrigerant line set with 50 ft liquid and suction lines for air conditioning and refrigeration systems
- ColorTransparent
- Copper construction resists corrosion for lasting refrigerant flow
- 50 ft roll covers extended runs without extra joints
- Pre-insulated lines reduce thermal loss on suction side
- Paired liquid and suction lines simplify installation
- Suitable for air conditioning and refrigeration systems
HVAC copper line set
The Streamline 61020500 is a 50 ft copper line set built for air conditioning and refrigeration systems. It ships as a single roll that contains both the liquid line and the suction line for a complete installation. The set is new and ready for professional or competent DIY use.
Liquid 3/8 in and suction 5/8 in
The liquid line has a 3/8 in outside diameter while the suction line measures 5/8 in outside diameter. These two dimensions decide whether the set matches the equipment you are connecting. Verify both sizes against your unit before purchase.
Half inch insulation on copper
Each line carries a 1/2 in thick insulation layer that limits thermal loss and condensation during normal operation. Copper construction handles typical system pressures without added noise or vibration. The roll format keeps the lines together for easier routing.
Highlights
- Copper construction resists corrosion for lasting refrigerant flow
- 50 ft roll covers extended runs without extra joints
- Pre-insulated lines reduce thermal loss on suction side
- Paired liquid and suction lines simplify installation
- Suitable for air conditioning and refrigeration systems
Specifications
| Brand | STREAMLINE |
|---|---|
| Color | Transparent |
Questions about this item
How does the 50 ft length work once the line set is installed in a real system?
The 50 ft copper roll provides both liquid and suction lines in one coil, giving you enough continuous tubing to run between the condenser and evaporator without splicing, then cut to the exact distances your layout requires.
What does the 3/8 in. liquid and 5/8 in. suction sizing cap in practice?
Those outside diameters set the maximum refrigerant flow the lines can carry, so the set matches equipment rated for 3/8 in. liquid and 5/8 in. suction connections; larger tonnage units would need bigger tubing.
What does the 1/2 in. insulation thickness mean for mounting the lines?
The half-inch wall on each tube adds roughly one inch to the overall bundle diameter, so plan hangers, penetrations and insulation tape overlaps for a bundle about 2-1/4 in. wide rather than the bare copper size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
