Streamline
Streamline 61020150 Refrigerant Line Set 15 Ft
Copper refrigerant line set, 15 ft, with 1/2 in insulation on both liquid and suction lines for air conditioning and refrigeration systems
- ColorTransparent
- Copper tubing resists corrosion for lasting refrigerant flow
- 15 ft length covers typical residential install distances
- Half-inch insulation on both lines reduces thermal loss
- Liquid and suction lines bundled for single-run routing
- 61020150 model fits standard AC and refrigeration systems
Streamline 15 ft Refrigerant Line Set
The Streamline 61020150 is a copper refrigerant line set designed for air conditioning and refrigeration systems. It provides a 15 foot length of liquid and suction lines pre-insulated for immediate installation. This set suits HVAC technicians and installers completing new runs or replacements.
Thermals noise and power draw
The copper construction handles refrigerant transfer while the half inch insulation thickness on both lines limits thermal loss and prevents condensation. No electrical components or moving parts are present so the set draws no power and produces no operational noise. Performance depends on the connected system's specifications.
Build fit and constraints
The set includes a 3/8 inch outside diameter liquid line and a 5/8 inch outside diameter suction line, both supplied as a continuous roll with insulation already applied. It requires compatible flare or braze fittings and standard HVAC tools for termination. The fixed 15 foot length cannot be extended without adding joints which may affect system integrity.
Highlights
- Copper tubing resists corrosion for lasting refrigerant flow
- 15 ft length covers typical residential install distances
- Half-inch insulation on both lines reduces thermal loss
- Liquid and suction lines bundled for single-run routing
- 61020150 model fits standard AC and refrigeration systems
Specifications
| Brand | STREAMLINE |
|---|---|
| Color | Transparent |
Questions about this item
How is the 15 Ft Streamline 61020150 line set installed, and what step is commonly missed?
Connect the 3/8 in liquid line and 5/8 in suction line using flare fittings, then pressure-test with nitrogen; the step often missed is a proper nitrogen purge while brazing to prevent oxide scale inside the copper.
What maintenance or replacement will the Streamline 61020150 line set need later?
Inspect the 1/2 in insulation annually for UV damage, compression or moisture ingress; replace any deteriorated sections to stop suction-line sweating and capacity loss.
What limit appears first on the Streamline 61020150 line set under sustained use?
The 1/2 in insulation on the 5/8 in suction line saturates first, causing condensation drip and reduced system efficiency during long cooling runs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
