We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rubber drive belt in branded sleeve, 3/8 inch wide, 43 inch length

Stens

Stens 266-147 Drive Belt accessory

SKU CH-3A42-N9WE6

Replacement drive belt for compatible Husqvarna and Poulan wheeled trimmers, 43 inches long and 3/8 inch wide

  • OEM replacement belt fits Husqvarna HU625HWT and Poulan PR22WT wheeled trimmers
  • Raw-edge drive belt design delivers reliable power transfer to the cutting deck
  • 3/8 inch width and 43 inch length match original equipment specifications
  • Replaces multiple OEM part numbers including 185476 and 532185476
  • New Stens branded sleeve packaging protects belt until installation

Compatible Drive Belt for Wheeled Trimmers

This Stens drive belt replaces OEM part numbers 185476 and 532185476 on Husqvarna HU 625HWT and Poulan PR22WT wheeled trimmers. It is a direct-fit replacement component designed to restore the drive function on those specific models.

Raw-Edge Construction and Belt Dimensions

The belt uses a raw-edge design with a width of 3/8 inch and a length of 43 inches. These specifications match the original equipment requirements for the listed trimmers to transmit power without slippage under normal cutting loads.

Branded Sleeve Packaging

The belt ships in a Stens branded sleeve that protects the raw-edge surface during storage and handling. No additional hardware, tools or lubricants are included in the package.

Highlights

  • OEM replacement belt fits Husqvarna HU625HWT and Poulan PR22WT wheeled trimmers
  • Raw-edge drive belt design delivers reliable power transfer to the cutting deck
  • 3/8 inch width and 43 inch length match original equipment specifications
  • Replaces multiple OEM part numbers including 185476 and 532185476
  • New Stens branded sleeve packaging protects belt until installation

Specifications

BrandStens

Questions about this item

How do I route the 43-inch raw-edge belt onto the HU625HWT and what step do people skip?

Remove the belt cover, slip the 3/8-inch wide belt onto the engine pulley first, then the transmission pulley, and re-seat the idler so the raw edges run true; most forget to re-engage the idler spring.

What wear signs tell me the 266-147 drive belt needs replacing on my PR22WT?

Look for fraying on the raw edges, a shiny glazed surface where the belt contacts the pulleys, cracks across the ribs, or noticeable slack that the idler can no longer take up.

What limits how long the Stens 266-147 belt can run continuously on a Husqvarna 625HWT?

Heat buildup in the raw-edge construction is the first limit; extended heavy cutting loads raise pulley temperatures until the belt glazes and loses grip.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.