STEINER
STEINER 397 Welding Blanket Fiberglass 6x6 ft 26 oz/sq yd
Fiberglass welding blanket measuring 6 ft by 6 ft with vermiculite coating rated to 1,200 degrees F and 26 oz/sq yd weight
- TypeWelding Protection
- Handles 1,200 °F heat for heavy-duty welding
- Vermiculite-coated fiberglass resists slag, sparks and spatter
- 26 oz/sq yd weight gives durable abrasion protection
- Grommets on 24 in spacing allow secure fastening
- FM Approved rating confirms safety compliance
Heavy-duty welding protection
The STEINER 397 welding blanket measures 6 ft by 6 ft and uses 26 oz/sq yd fiberglass with a vermiculite coating. It is rated for a maximum temperature of 1,200 Degrees F and carries FM Approved certification. Grommets on each corner allow secure fastening for vertical or horizontal use.
Sustained high-heat performance
The vermiculate coating and heavy duty rating enable the blanket to withstand continuous exposure to molten slag, sparks and spatter without burning through. Abrasion resistance helps the material survive repeated contact with rough workpieces. The 0.05 in thickness maintains its protective integrity during extended welding or cutting sessions.
Practical coverage limits
At 6 ft square the blanket covers a defined work zone but leaves larger assemblies partially exposed. Grommet spacing of 24 in supports stable hanging yet restricts configuration options for irregular shapes. Users needing broader area protection or higher temperature thresholds will require additional or alternative shielding.
Highlights
- Handles 1,200 °F heat for heavy-duty welding
- Vermiculite-coated fiberglass resists slag, sparks and spatter
- 26 oz/sq yd weight gives durable abrasion protection
- Grommets on 24 in spacing allow secure fastening
- FM Approved rating confirms safety compliance
Specifications
| Type | Welding Protection |
|---|---|
| Brand | STEINER |
Questions about this item
Does the 26 oz/sq yd fiberglass with vermiculite coating get stiff or degrade after long exposure to 1,200 °F?
The vermiculite-coated fiberglass is rated for continuous use up to 1,200 °F and is FM Approved for heavy-duty slag, spark and spatter resistance, so it retains flexibility and protection during all-day welding.
What mounting hardware do I need to hang the 6 ft × 6 ft blanket from its corner grommets?
Each corner has two grommets spaced 24 in apart; you supply the hooks, chains or ropes that fit those grommets to secure the blanket in place.
Will the 0.05 in thick, 26 oz/sq yd blanket protect the painted finish on my older steel work table from slag burn-through?
The heavy-duty, abrasion-resistant fiberglass stops molten slag and spatter at 1,200 °F, shielding the table surface from burn-through and cosmetic damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
