STEINER
STEINER 376 Welding Blanket 10 ft W 8 ft H 28 oz/sq yd
Fiberglass welding blanket rated to 1,000 °F with acrylic coating, 10 ft by 8 ft, 28 oz/sq yd, grommets every 24 in, FM approved
- TypeWelding Protection
- Withstands 1,000 °F thanks to acrylic-coated fiberglass
- Medium-duty protection rated at 28 oz/sq yd
- FM Approved safety standard for welding environments
- Spark and spatter resistant surface shields work area
- Grommets on 24 in spacing allow secure hanging
STEINER 376 Medium-Duty Welding Blanket
This STEINER 376 welding blanket measures 10 ft wide by 8 ft high and weighs 28 oz per square yard. It uses acrylic-coated fiberglass rated to 1,000 degrees F with a 0.05 in thickness. FM Approved construction provides abrasion, spark and spatter resistance for medium-duty hot-work protection.
Suitable for welders needing a large
The 10 ft by 8 ft sheet covers broad work areas and the grommets on 24 in spacing allow secure hanging. Buyers who need a lighter blanket for frequent repositioning or a higher temperature rating for heavy industrial processes should look at alternative specifications.
Simple hanging installation with corner grommets
Each corner has two grommets so the blanket can be fastened to frames or scaffolding with wire or hooks. The fiberglass material is stiff when new and may shed fibers during initial handling; wearing gloves reduces skin irritation while mounting.
Highlights
- Withstands 1,000 °F thanks to acrylic-coated fiberglass
- Medium-duty protection rated at 28 oz/sq yd
- FM Approved safety standard for welding environments
- Spark and spatter resistant surface shields work area
- Grommets on 24 in spacing allow secure hanging
Specifications
| Type | Welding Protection |
|---|---|
| Brand | STEINER |
Questions about this item
What mounting points does the STEINER 376 blanket need on my structure?
The blanket has two grommets on each corner spaced 24 in apart, so you need anchors or hooks that match that spacing.
Will the 28 oz/sq yd fiberglass handle spatter from my older stick welder?
Yes, the acrylic-coated fiberglass is rated spark resistant and spatter resistant up to 1,000 Degrees F, covering typical stick-welding spatter.
How can I verify the blanket is performing correctly during a job?
Check that no sparks or molten spatter penetrate the black fiberglass surface and that the grommets remain secure with no tearing at the 0.05 in thick material.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
