STEINER
STEINER 364 Welding Blanket Fiberglass 6x8 ft 24 oz 1000 Degrees F
Fiberglass welding blanket measuring 6 by 8 feet withstands 1000 degrees Fahrenheit with acrylic coating, 24 oz weight and grommets on each corner
- TypeWelding Protection
- Withstands 1000 °F heat for heavy welding
- 24 oz/sq yd fiberglass resists sparks and spatter
- Acrylic-coated surface adds abrasion resistance
- FM Approved certification confirms safety standards
- Brass grommets on 24 in spacing allow secure hanging
Protective Fiberglass Welding Blanket
The STEINER 364 welding blanket uses a 24 oz/sq yd fiberglass fabric with an acrylic coating to shield surrounding areas during welding or cutting operations. It is rated to withstand temperatures up to 1000 degrees F and carries an FM Approved designation for verified performance. The medium duty rating makes it suitable for general fabrication, maintenance and repair tasks where spark and spatter containment is required.
Sustained Heat and Spark Containment
The acrylic-coated fiberglass resists abrasion, sparks and molten spatter continuously during prolonged welding sessions rather than only brief exposure. Its 0.04 in thickness provides a durable barrier that maintains integrity under repeated thermal cycling. The material remains stable at the rated maximum temperature, allowing the blanket to protect floors, equipment and personnel throughout extended shifts without degradation.
Grommeted Edges for Secure Mounting
Brass grommets are positioned two per corner with 24 in spacing along the perimeter, enabling the 6 ft by 8 ft sheet to be tied down, draped over scaffolding or suspended as a vertical curtain. The reinforced eyelets resist tearing when the blanket is tensioned or repositioned frequently. Yellow coloring improves visibility in low-light workshops, reducing trip hazards while the blanket is deployed.
Highlights
- Withstands 1000 °F heat for heavy welding
- 24 oz/sq yd fiberglass resists sparks and spatter
- Acrylic-coated surface adds abrasion resistance
- FM Approved certification confirms safety standards
- Brass grommets on 24 in spacing allow secure hanging
Specifications
| Brand | STEINER |
|---|---|
| Type | Welding Protection |
Questions about this item
How much heat can the 1000-degree fiberglass blanket handle during all-day welding?
The STEINER 364 blanket is rated for continuous exposure up to 1000 degrees Fahrenheit, so it withstands prolonged welding heat without degrading.
What mounting points does the 6x8 ft blanket need to stay in place?
It has two grommets on each corner spaced 24 inches apart, so you only need hooks, bolts or wire that fit standard grommet holes.
Will the 0.04 in thick acrylic-coated fiberglass resist sparks landing on older steel workbenches?
Yes, the 24 oz/sq yd material is rated spark resistant, spatter resistant and abrasion resistant, protecting surfaces underneath.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
