STEINER
STEINER 316-8X10 Carbon Fiber Welding Blanket 10x8 ft 16 oz/sq yd
Carbon fiber welding blanket measuring 10 by 8 feet withstands 1,800 degrees Fahrenheit and resists sparks, slag and spatter
- TypeWelding Protection
- Withstands 1,800 °F for extreme heat protection
- Carbon-fiber material resists abrasion, slag, sparks and spatter
- Heavy-duty 16 oz/sq yd weight ensures durability
- Large 10 ft by 8 ft coverage shields broad work areas
- FM-approved certification confirms safety compliance
Steiner 316-8X10 Carbon Fiber Welding Blanket
The Steiner 316-8X10 is a heavy-duty carbon fiber welding blanket measuring 10 ft by 8 ft with a weight of 16 oz/sq yd. It is designed for professional welders and fabricators who need reliable protection against intense heat, sparks, slag, and spatter during demanding welding operations. The uncoated carbon fiber material withstands temperatures up to 1,800 degrees F.
Installation and common issues
The blanket lays flat over equipment or work areas without grommet holes for fastening. Users typically weigh the edges down with chains or magnets to prevent movement during overhead or vertical welding. The 0.15 in thickness makes it stiff in cold temperatures, so it should be warmed before unfolding to avoid cracking the carbon fibers.
FM Approved heavy-duty rating
This blanket carries an FM Approved certification and a Heavy duty rating, confirming it meets industrial safety standards for fire and heat resistance. That approval is the deciding factor for shops that must satisfy insurance or site-safety requirements. Without the FM mark, the blanket would not be accepted on many regulated job sites.
Highlights
- Withstands 1,800 °F for extreme heat protection
- Carbon-fiber material resists abrasion, slag, sparks and spatter
- Heavy-duty 16 oz/sq yd weight ensures durability
- Large 10 ft by 8 ft coverage shields broad work areas
- FM-approved certification confirms safety compliance
Specifications
| Type | Welding Protection |
|---|---|
| Brand | STEINER |
Questions about this item
How can I confirm the blanket is performing correctly after I lay it out?
Check that the carbon-fiber fabric lies flat at its full 10 ft by 8 ft size, shows no burn-through after exposure to 1,800 °F spatter, and remains intact with its 0.15 in thickness and 16 oz/sq yd weight.
What comes with the blanket and what must I purchase separately?
The box contains the single 10 ft x 8 ft carbon-fiber welding blanket only; no grommets, fasteners, or mounting hardware are included, so buy clamps or ties separately if you need to secure it.
Which version of this blanket should I choose for heavy-duty welding?
This model 316-8X10 is the heavy-duty grade rated to 1,800 °F with 16 oz/sq yd carbon-fiber material; no other weight or temperature variants are offered for this part number.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
