Steelman
Steelman 98457-IND 3/8" x 35 ft Air Hose Reel 300 psi
A 35 ft, 3/8 in air hose reel rated to 300 psi for workshop compressed-air supply
- 35 ft reach lets you work farther from the compressor
- 3/8 in bore delivers strong airflow for demanding tools
- 300 psi rating handles heavy-duty shop pressure
- Retractable reel keeps the hose tidy and ready
- Model 98457 built for professional automotive use
35 ft 3/8 in Air Hose Reel
The Steelman 98457-IND is a 35 foot by 3/8 inch air hose reel rated for a maximum of 300 psi. It supplies compressed air to pneumatic tools in automotive and workshop environments. The integrated reel keeps the hose organised and ready for use. This unit suits technicians who need a contained hose supply at the work point.
Spring-retract installation and common issues
Mount the reel on a solid wall, ceiling or bench surface using the provided bracket holes. Pull the hose out to the desired length and it will latch; a short tug releases the latch for automatic retraction. The most frequent problem is the hose failing to retract fully when the spring loses tension or the guide roller binds. Another common issue is leakage at the inlet swivel if thread sealant is omitted or the fitting is cross-threaded.
Checks before ordering
Verify that your compressor can deliver pressure up to 300 psi and that its outlet fitting matches the reel inlet thread. Confirm the mounting location has enough clearance for the reel diameter and the full 35 foot hose travel. Ensure the 3/8 inch hose bore suits the air flow requirements of your pneumatic tools.
Highlights
- 35 ft reach lets you work farther from the compressor
- 3/8 in bore delivers strong airflow for demanding tools
- 300 psi rating handles heavy-duty shop pressure
- Retractable reel keeps the hose tidy and ready
- Model 98457 built for professional automotive use
Specifications
| Brand | STEELMAN |
|---|
Questions about this item
How do I confirm the reel is delivering air at the rated 300 psi after I mount it?
Connect the reel to your compressor, pressurise the system, and verify the gauge on the compressor reads 300 psi while the hose is fully extended and the tool is running.
What comes in the box with the 98457-IND and what must I supply separately?
The reel ships with the 35 ft 3/8 in hose pre-installed; you will need to provide the mounting hardware, a 3/8 in quick-connect fitting for your compressor, and any tool couplers you use.
Which capacity should I choose for a typical garage air system?
The 35 ft length and 3/8 in bore suit most garage compressors rated up to 300 psi, giving enough reach for tyre inflation and air tools without excessive pressure drop.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
