Steelman
Steelman 60443 5-Piece 1/2" Drive 6-Point Thin Wall Impact Flip Socket Set
Five-piece 1/2-inch drive set with dual-ended 6-point flip sockets covering lug sizes from 18.5 mm to 22.5 mm
- ColorTransparent
- Dual-ended design covers six lug-nut sizes per socket
- 6-point impact grip reduces rounding on 18.5 mm, 19.5 mm, 21 mm, 21.5 mm, 22 mm, 22.5 mm fasteners
- Chromoly steel with black oxide coating meets 150% ASME proof-torque standard
- Recessed drive edges engage flats not corners for secure fit on impact tools
- 1/2-inch drive flip sockets and knockout bar speed up wheel service
Five dual-ended flip sockets
The Steelman 60443 set contains five 1/2-inch drive 6-point thin-wall impact flip sockets. Each socket is dual-ended, giving two sizes per piece for a total of ten lug-nut applications. Designed for professional automotive shops and serious DIY mechanics who need to change wheel fasteners quickly.
Covers 18.5 mm through 22.5 mm lug nuts
The four dual-ended sockets span 18.5 mm, 19.5 mm, 21 mm, 21.5 mm, 22 mm and 22.5 mm with deliberate overlap between adjacent sizes. This range covers the most common passenger-vehicle and light-truck wheel nuts, so the set fits the job or it does not.
Knockout bar removes stuck sockets
A knockout bar is included to dislodge sockets that bind on an impact extension or extended anvil. The chromoly steel sockets carry a black oxide coating and meet 150% ASME proof-torque standards, while the bar keeps workflow moving when a socket seizes on a stubborn fastener.
Highlights
- Dual-ended design covers six lug-nut sizes per socket
- 6-point impact grip reduces rounding on 18.5 mm, 19.5 mm, 21 mm, 21.5 mm, 22 mm, 22.5 mm fasteners
- Chromoly steel with black oxide coating meets 150% ASME proof-torque standard
- Recessed drive edges engage flats not corners for secure fit on impact tools
- 1/2-inch drive flip sockets and knockout bar speed up wheel service
Specifications
| Brand | STEELMAN |
|---|---|
| Color | Transparent |
Questions about this item
How do the dual-ended flip sockets cover the range of lug-nut sizes on the job?
Each of the four sockets fits two sizes — 18.5 mm/19.5 mm, 21 mm/21.5 mm, 22 mm/22.5 mm — so the set handles six common lug-nut diameters with only four tools.
What does the 150 % ASME proof-of-torque rating mean when the sockets are on an impact wrench?
The chromoly steel sockets are tested to withstand 1.5 times the ASME proof torque, giving a safety margin for high-torque impact applications.
What drive size and clearance do these sockets need to mount on my equipment?
They use a 1/2-inch drive and recessed edges that fit over an impact extension or extended anvil without binding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
