We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminized Thermonol flame resistant overpants in XL size

Steel Grip

Steel Grip ATH410 Flame Resistant Pants XL 19 oz Aluminized Thermonol personal protective equipment

SKU CH-YF0F-AAQV1

Flame-resistant aluminized overpants sized XL with a 19 oz fabric weight, adjustable 30 to 34 inch inseam and snap waist closure fitting up to 40 inches

  • Flame-resistant protection with 19 oz aluminized Thermonol fabric
  • Adjustable inseam range from 30 to 34 inches for fit flexibility
  • Overpant design adds a protective layer over workwear
  • Snap waist closure secures up to a 40 inch waist
  • Model ATH410 built for high-heat industrial environments

Steel Grip ATH410 Flame Resistant Pants

The Steel Grip ATH410 is a pair of flame-resistant overpants made from 19 oz aluminized Thermonol fabric. They are sized XL with a maximum waist size of 40 in and an inseam range of 30 in to 34 in. The waist closes with snap fasteners for quick donning over work clothing.

Industrial workers needing heat and flame protection

These pants suit personnel who require a heavy-weight aluminised layer worn over base garments in high-heat environments. They are not intended for workers who need a lighter fabric weight, a different waist size, or a garment with a longer inseam than 34 in.

19 oz aluminized Thermonol fabric weight

The 19 oz aluminized Thermonol material determines the level of thermal protection and durability. Buyers must confirm that this specific fabric weight meets the safety standards required for their application before purchasing.

Highlights

  • Flame-resistant protection with 19 oz aluminized Thermonol fabric
  • Adjustable inseam range from 30 to 34 inches for fit flexibility
  • Overpant design adds a protective layer over workwear
  • Snap waist closure secures up to a 40 inch waist
  • Model ATH410 built for high-heat industrial environments

Specifications

BrandSTEEL GRIP

Questions about this item

How do I secure the snap waist closure on the Steel Grip ATH410 aluminized Thermonol overpants?

Fasten each snap firmly through both fabric layers so the 19 oz aluminized material overlaps completely; the step often missed is checking that every snap is fully engaged before entering a high-heat area.

When should the aluminized Thermonol fabric be replaced?

Replace the pants once the 19 oz aluminized surface shows cracking, delamination, or worn spots that expose the base Thermonol, because the reflective layer can no longer shed radiant heat effectively.

What waist measurement stops the XL overpants from fitting?

The snap closure reaches its limit at a 40 in waist; beyond that the snaps cannot close and the 30 in to 34 in inseam will not compensate for the gap.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.