We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Starrett steel-frame outside micrometer with carbide flat anvil, ratchet thimble and vernier scale, 9 to 10 in range

Starrett

Starrett T436.1XRL-10 Outside Micrometer 9 to 10 in

SKU CH-MBPW-ENM1Q

Measures 9 in to 10 in with .0001 in resolution using a vernier scale and carbide anvils

  • Measures 9 to 10 in with .0001 in resolution
  • Vernier scale reads to .0001 in for precise results
  • Carbide flat anvil resists wear for lasting accuracy
  • Ratchet thimble gives consistent measuring force
  • Steel frame with included case protects the tool

Starrett Outside Micrometer 9-10 in

This new Starrett mechanical outside micrometer covers a 9 in to 10 in measuring range. It features a vernier display with 0.0001 in resolution and +/- 0.0001 in accuracy. The steel frame carries a carbide-tipped flat anvil and a 0.3 in diameter rotating spindle.

Suited for inch-based inspection up to 10 in

Machinists and inspectors who need to verify external dimensions between 9 in and 10 in will find the ratchet thimble and ring lock nut useful for repeatable force and secure locking. Buyers who require metric readouts or a measurement range outside this single inch span should look at something else.

Resolution and accuracy set at 0.0001 in

The vernier scale graduates to 0.0001 in and the instrument is specified to +/- 0.0001 in accuracy across the full 9 in to 10 in range. A long-form calibration certificate is not included. The supplied case and adjustable wrench complete the kit for immediate use.

Highlights

  • Measures 9 to 10 in with .0001 in resolution
  • Vernier scale reads to .0001 in for precise results
  • Carbide flat anvil resists wear for lasting accuracy
  • Ratchet thimble gives consistent measuring force
  • Steel frame with included case protects the tool

Specifications

BrandSTARRETT

Questions about this item

What spindle diameter does the 9-to-10-inch micrometer use?

The spindle measures 0.3 in, which is the standard size for this frame and allows the carbide anvil to contact the workpiece evenly.

How do I zero the vernier before taking a reading?

Close the spindle against the anvil using the ratchet thimble, then turn the lock nut ring until the vernier zero line aligns with the sleeve reference line.

When should the carbide anvil be checked for wear?

Inspect the flat carbide anvil whenever the micrometer is calibrated; if the surface shows pitting or flatness loss, replace the anvil to maintain the stated 0.0001-in accuracy.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.