We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Starrett digital caliper stainless steel body LCD display 0-150mm range

Starrett

Starrett EC799B-6/150 Digital Caliper 0-6"/0-150mm Stainless Steel

SKU CH-96JK-ZYMK4

Measures 0–150 mm with .01 mm resolution and ±.04 mm accuracy on a stainless steel frame

  • Measures 0-150 mm with 0.01 mm resolution
  • Accuracy ±0.04 mm meets DIN 862 standard
  • Stainless steel body resists corrosion and wear
  • Absolute positioning keeps zero after power loss
  • SPC output enables direct data collection

Starrett EC799B Digital Caliper

The Starrett EC799B is a stainless-steel digital caliper built for machinists, engineers and technicians who need reliable shop-floor measurements. It reads in both inch and millimetre units and meets DIN 862 standards for professional use. An ergonomic frame and fine-adjustment thumb wheel make repeated measurements comfortable and precise.

150 mm Range with 0.01 mm Resolution

The tool measures from zero to 150 millimetres with a displayed resolution of 0.01 mm and an accuracy of ±0.04 mm. Inch-mode resolution is 0.0005 in with an accuracy of ±0.0015 in. Absolute positioning retains the zero point after power cycling, while the 1 1/2 in jaw depth covers typical outside, inside, depth and step tasks. The caliper is not IP-rated and lacks a long-form calibration certificate.

Upgrade from Vernier or Basic Digital Models

This caliper replaces vernier instruments or entry-level digitals that lack absolute positioning, SPC data output or the fine-adjustment thumb wheel. The jump is worthwhile when you need direct data logging to a collector, consistent zero retention between sessions, or the DIN 862 conformity required by quality systems. Buyers who need longer reach or an IP-rated tool should look elsewhere.

Highlights

  • Measures 0-150 mm with 0.01 mm resolution
  • Accuracy ±0.04 mm meets DIN 862 standard
  • Stainless steel body resists corrosion and wear
  • Absolute positioning keeps zero after power loss
  • SPC output enables direct data collection

Specifications

BrandSTARRETT

Questions about this item

Will the Starrett EC799B-6/150's SPC output work with my existing data-collection cable?

The caliper includes an SPC output port; you need a compatible SPC cable to connect it to your current data-collection setup.

How do I verify the 0.0005 in resolution is functioning correctly after unpacking?

Close the jaws fully, zero the display, then open them slowly; the LCD should increment in 0.0005 in steps.

Does the Starrett EC799B-6/150 come with a calibration certificate or must I purchase calibration separately?

The supplier data states no long-form calibration certificate is included; calibration service must be arranged separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.