We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SSI digital pressure gauge 1000 psi 3 inch dial 1/4 NPT ABS case 316L sensor 304L socket

SSI

SSI MG-1000-A-9V-R Digital Test Pressure Gauge 1000 psi 3 in Dial 1/4 NPT

SKU CH-633K-JTAP2

Digital test gauge measures pressure up to 1000 psi with .25% accuracy and a 316L stainless steel diaphragm sensor

  • TypeElectronic
  • +/- 0.25% accuracy for reliable readings
  • 1000 psi range covers demanding applications
  • 316L stainless sensor resists corrosion
  • 304L stainless socket ensures durability
  • NEMA 4X rating protects against harsh environments

Digital pressure gauge for fluid testing

The SSI MG-1000-A-9V-R measures pressure from 0 to 1000 psi on a 3 in dial. It suits technicians checking brake fluid, diesel, hydraulic fluid, motor oil, nitrogen, air, salt water, sea water or waste water. The sensor uses 316L stainless steel and the socket uses 304L stainless steel for chemical compatibility.

Accuracy and environmental rating change daily use

Stated accuracy is +/- .25 percent across the range. The ABS case carries a NEMA 4X rating for wash-down and corrosion resistance. The diaphragm sensor reads in psi, bar and Mpa without a protective lens over the display.

Threaded NPT connection simplifies installation

The 1/4 NPT process connection threads directly into compatible ports. No lens means the display face must be kept clear of heavy impact or abrasive debris. The gauge is not rated for hazardous locations, so it cannot be used in classified explosive atmospheres.

Highlights

  • +/- 0.25% accuracy for reliable readings
  • 1000 psi range covers demanding applications
  • 316L stainless sensor resists corrosion
  • 304L stainless socket ensures durability
  • NEMA 4X rating protects against harsh environments

Specifications

BrandSSI
TypeElectronic

Questions about this item

How often will the 9 V battery need replacement during regular use?

The gauge runs on a standard 9 V cell; battery life depends on how frequently the display is active and whether the backlight is used, so plan on a fresh cell every few months for daily testing.

What limits continuous operation at the 1000 psi upper range?

The diaphragm sensor is rated to 1000 psi; sustained pressure at that level is within specification, but the ABS case and 316L stainless sensor set the practical ceiling.

Does the ABS case get hot or does the gauge draw noticeable power during all-day logging?

Power draw is limited to the 9 V supply for the electronics, and the ABS housing stays at ambient temperature because no heating elements or high-current circuits are present.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.