SQUARE D BY SCHNEIDER ELECTRIC
SQUARE D BY SCHNEIDER ELECTRIC 9001BG308 Push Button Control Station 30mm 1NO/1NC
Wall-mounted push-button control station with two 30 mm momentary operators, 1NO/1NC contacts rated 5 A at 600 V AC or 24 V DC, IP20 plastic enclosure, CE, CSA and UL listed
- Start/Stop control with two 30 mm momentary push buttons
- 1NO/1NC contact rated 5 A at 600 V AC / 24 V DC
- Wall-mount plastic enclosure rated NEMA 1 and IP 20
- CE marked, CSA certified and UL listed for safety compliance
- Mechanical interlock not fitted for independent button operation
Push Button Control Station 30 mm
The SQUARE D 9001BG308 is a wall-mounted push button control station designed for industrial control circuits. It houses two 30 mm momentary operators with a Start/Stop legend in a plastic enclosure. The unit provides one normally open and one normally closed contact rated at 5 A for 600 V AC or 24 V DC. It carries CE, CSA and UL markings and is rated NEMA 1 and IP20.
Replaces Older 30 mm Stations
This station replaces legacy 30 mm push button stations that lack the combined 1NO/1NC contact arrangement or the Start/Stop legend. The upgrade is worthwhile when a compact, certified unit with momentary action on both operators is required for motor start/stop circuits. It is not suited for applications needing maintained contact action, mechanical interlock between operators or a higher environmental rating than NEMA 1.
Fits Standard 30 mm Cut-Outs
The station mounts directly to a flat surface using the integral plastic enclosure, eliminating the need for a separate enclosure box. Its 30 mm operator size matches standard panel cut-outs, simplifying installation in existing control panels. The 5 A contact rating at 600 V AC covers typical industrial control voltage levels, freeing the specifier from selecting separate contact blocks for each operator.
Highlights
- Start/Stop control with two 30 mm momentary push buttons
- 1NO/1NC contact rated 5 A at 600 V AC / 24 V DC
- Wall-mount plastic enclosure rated NEMA 1 and IP 20
- CE marked, CSA certified and UL listed for safety compliance
- Mechanical interlock not fitted for independent button operation
Specifications
| Brand | SQUARE D |
|---|
Questions about this item
What size panel cut-out does the 30 mm push button station need?
The operators are 30 mm diameter, so a standard 30 mm round cut-out is required for each button.
How is the station mounted and which step is often missed?
It is wall-mounted using the enclosure's integral lugs; the step often missed is tightening the gland or conduit entry to maintain the IP20 rating.
Which parts will need replacement after extended use?
The internal contacts are rated 5 A at 600 V AC and 24 V DC; replace the contact block when switching becomes unreliable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
