We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue synthetic lubricant in a one-quart bottle

SPEEDAIRE

SPEEDAIRE Synthetic Lubricant 2EPU7 Blue 1 qt

SKU CH-S9ZG-R4PB5

Synthetic vacuum pump oil rated ISO 220 with a 126 viscosity index, operating from -38 °F to 300 °F and a 450 °F flash point

  • Synthetic base resists breakdown up to 300 °F
  • Low pour point of -38 °F ensures cold starts
  • ISO 220 viscosity grade matches positive displacement blower specs
  • High 450 °F flash point adds safety margin
  • Viscosity index 126 maintains film strength across temperatures

Synthetic Lubricant for Positive Displacement

SPEEDAIRE 2EPU7 is a synthetic vacuum pump oil formulated for positive displacement blowers. The blue fluid comes in a one-quart bottle and carries an ISO viscosity grade of 220 with a viscosity index of 126. It is designed for industrial maintenance where synthetic base stocks are required.

Sustained High-Temperature Operation

The lubricant maintains film strength up to a maximum operating temperature of 300 degrees Fahrenheit and offers a flash point of 450 degrees Fahrenheit. Its pour point of -38 degrees Fahrenheit ensures flow during cold starts, while the high viscosity index resists thinning during extended run cycles. These properties support consistent blower performance under continuous thermal load.

Compatibility Checks Before Ordering

Verify that your blower manufacturer specifies an ISO VG 220 synthetic oil and that the operating envelope stays within the 0 to 300 degrees Fahrenheit range. Confirm the equipment does not require an NSF-rated lubricant, as this product carries no NSF rating. Ensure the one-quart container matches your service interval volume requirements.

Highlights

  • Synthetic base resists breakdown up to 300 °F
  • Low pour point of -38 °F ensures cold starts
  • ISO 220 viscosity grade matches positive displacement blower specs
  • High 450 °F flash point adds safety margin
  • Viscosity index 126 maintains film strength across temperatures

Specifications

BrandSPEEDAIRE

Questions about this item

Will the 300 °F maximum operating temperature and 450 °F flash point keep the oil stable during continuous duty?

The lubricant is rated for a maximum operating temperature of 300 °F with a flash point of 450 °F, so it remains stable under continuous duty within that range.

My blower currently runs on a mineral-based ISO 220 fluid — can I switch directly to this synthetic ISO 220 without flushing?

The product is a synthetic ISO 220 vacuum pump oil for positive displacement blowers; compatibility with the existing mineral fluid should be confirmed with the blower manufacturer before switching.

Will the pour point of -38 °F and viscosity index of 126 protect the blower during cold starts in an unheated shop?

With a pour point of -38 °F and a viscosity index of 126, the oil flows readily at low temperatures and maintains consistent viscosity, aiding cold-start protection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.