SPEEDAIRE
SPEEDAIRE Parker H1EWXBBL53C Solenoid Air Control Valve 4-Way 145 psi
A 4-way solenoid air control valve rated for 145 psi maximum pressure with 120V AC actuation and 1.5 cfm flow capacity
- 4-way 2-position design directs airflow efficiently
- 120 V AC solenoid with spring air assist ensures reliable actuation
- 35 to 145 psi operating range suits varied pneumatic systems
- NEMA 4 rating protects against dust and water ingress
- 30 mm DIN 43650 A connector simplifies electrical installation
Parker H1EWXBBL53C Solenoid Valve
This Parker H1EWXBBL53C is a 4-way, 2-position solenoid air control valve built for base-mounted installation. It operates on 120V AC with a solenoid/spring air-assist actuator and connects via a 30mm 3-pin DIN 43650 A connector. The valve delivers a 1.5 cfm flow coefficient and conforms to ISO 5599-1 standards.
Replaces manual or 3-way valves
Upgrading to this 4-way valve adds automated directional control for double-acting cylinders, removing the need for manual lever operation. The jump is worth it when a process requires reliable electrical switching between two output ports at pressures between 35 and 145 psi. It also supports vacuum lines down to 28 in Hg.
Sustained duty at 145 psi
Under continuous cycling the packed-spool design maintains sealing integrity across the full 35 to 145 psi pressure range with a 25 psi pilot requirement. The NEMA 4 rating protects the coil and wiring from wash-down and dust ingress during extended shifts. Spring-assisted return ensures consistent de-energised positioning without pressure decay.
Highlights
- 4-way 2-position design directs airflow efficiently
- 120 V AC solenoid with spring air assist ensures reliable actuation
- 35 to 145 psi operating range suits varied pneumatic systems
- NEMA 4 rating protects against dust and water ingress
- 30 mm DIN 43650 A connector simplifies electrical installation
Specifications
| Brand | PARKER |
|---|
Questions about this item
What base-mount pattern and electrical connector does the SPEEDAIRE Parker H1EWXBBL53C valve require?
The valve uses a 30 mm base-mounted body with a 3-pin DIN 43650 A electrical connection for power and signal.
What pilot pressure and voltage must be supplied before energising the solenoid?
Apply 120 V AC to the coil and ensure at least 25 psi pilot pressure is present so the packed-spool shifts reliably.
When should the internal spool and seals be inspected or replaced?
Inspect the packed spool and seals if flow drops below 1.5 cfm or if the valve fails to shift within the 35 to 145 psi operating range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
