SPEEDAIRE
SPEEDAIRE NCDMB150-0900 Round Body Cylinder 1 1/2 in Bore 9 in Stroke
Double-acting round-body cylinder with a 1 1/2 inch bore, 9 inch stroke, stainless-steel body and chrome-plated rod
- TypeDouble Acting
- Stainless-steel body resists corrosion in harsh environments
- 1 1/2 in bore delivers strong push-pull force
- 9 in stroke covers long linear travel
- Double-acting design powers motion in both directions
- Magnetic piston enables position sensing without contact
SPEEDAIRE 1 1/2 in Bore Round Body Cylinder
This double-acting round body cylinder delivers linear force for automation and machinery tasks. Its stainless steel construction with an anodized finish resists corrosion in demanding environments. The magnetic piston enables position sensing without external switches. A chrome-plated piston rod reduces wear during extended cycles.
Nose-Mounted Design with 1/8 in NPT Inlet
Front nose mounting secures the cylinder directly to a bracket or frame, simplifying alignment in tight spaces. The single 1/8 in NPT air inlet accepts standard pneumatic fittings for quick plumbing. Non-repairable construction means the unit is replaced rather than rebuilt after service life. Double-acting operation provides controlled motion in both extend and retract strokes.
9 in Stroke Replaces Shorter Actuators
Upgrade from shorter-stroke cylinders when the application requires 9 inches of travel without increasing bore size. The 1 1/2 in bore maintains compatible force output while the longer stroke extends reach. The jump is worth it when machine layout demands extra travel but mounting footprint must stay unchanged. Not suited for applications needing adjustable cushioning or field-repairable seals.
Highlights
- Stainless-steel body resists corrosion in harsh environments
- 1 1/2 in bore delivers strong push-pull force
- 9 in stroke covers long linear travel
- Double-acting design powers motion in both directions
- Magnetic piston enables position sensing without contact
Specifications
| Brand | Speedaire |
|---|---|
| Type | Double Acting |
Questions about this item
What does the 1/8 in NPT air inlet mean for airflow capacity?
The 1/8 in NPT inlet limits flow to what that port size can pass; it suits low-to-moderate speed cycles on a 1 1/2 in bore cylinder.
What clearance does the nose-mount design require on the front face?
Nose mounting needs a threaded hole or bracket on the front face aligned with the rod centreline; allow space for the 1 1/2 in body diameter and rod extension.
How do you install a non-repairable round-body cylinder without damaging the seals?
Press the cylinder into the mounting bracket squarely, connect the 1/8 in NPT ports, then cycle slowly to bleed air — forcing the rod sideways during mounting tears the internal seals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
