SPEEDAIRE
SPEEDAIRE NCDMB106-0200 Round Body Cylinder 1 1/16 in Bore 2 in Stroke
Stainless-steel round-body cylinder with 1 1/16 in bore, 2 in stroke and magnetic piston for position sensing
- TypeDouble Acting
- Stainless steel body resists corrosion in harsh environments
- Double-acting design delivers force in both directions
- Magnetic piston enables position sensing for automation
- Nose mounting simplifies front-end installation
- Chrome-plated rod reduces wear for longer service life
Double-acting round body cylinder
This SPEEDAIRE cylinder uses a double-acting design with a single chrome-plated rod and a magnetic piston. The stainless-steel body has an anodized finish and a 1 1/16 inch bore with a 2 inch stroke. It mounts via the front nose and accepts 1/8 inch NPT air inlets.
Check air supply and mounting points
Verify that your system provides clean, dry compressed air at the required pressure for a 1/8 inch NPT connection. Ensure the front nose mounting surface is flat and aligned to accept the cylinder. The unit is non-repairable, so plan for full replacement if internal wear occurs.
Consistent force in both directions
Because the cylinder is double acting, air pressure extends and retracts the rod with equal control. The magnetic piston allows external position sensing without adding mechanical switches. With no internal cushion, end-of-stroke stops should be managed externally to avoid hard impacts during sustained cycling.
Highlights
- Stainless steel body resists corrosion in harsh environments
- Double-acting design delivers force in both directions
- Magnetic piston enables position sensing for automation
- Nose mounting simplifies front-end installation
- Chrome-plated rod reduces wear for longer service life
Specifications
| Brand | Speedaire |
|---|---|
| Type | Double Acting |
Questions about this item
What comes with the NCDMB106-0200 cylinder and what must be purchased separately?
The cylinder ships as a complete double-acting unit with a magnetic piston, chrome-plated rod and anodised stainless-steel body. Fittings for the 1/8 in NPT inlet and any nose-mount hardware are not included.
How do I choose between the available bore and stroke options for this model?
This specific part number is fixed at a 1 1/16 in bore and 2 in stroke; other bore or stroke combinations carry different part numbers.
What does the 2 in stroke deliver in actual use?
The 2 in stroke provides 2 inches of linear travel in each direction for push and pull operations in a double-acting circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
