SPEEDAIRE
SPEEDAIRE MP-0350 Oil/Water Separator 3 gal 50 hp 27 in
Removes oil and water from compressed air lines up to 50 hp with a 3 gal disposable module rated to 10 ppm
- Removes oil and water down to 10 ppm for clean air supply
- Handles compressors up to 50 hp for heavy-duty shop use
- 3 gal absorption module captures condensate before disposal
- Compact 27 in height fits tight utility spaces
- Operates reliably from 32 to 125 Degrees F across seasons
SPEEDAIRE MP-0350 Oil/Water Separator
This SPEEDAIRE oil and water separator removes condensate from compressed air lines. It handles a maximum air compressor horsepower of 50 hp and a maximum flow rate of 0.53 cfm. The unit has a 3 gal absorption module volume and stands 27 in tall. It is designed for industrial air systems requiring clean, dry air output.
Who This Suits and Who Should Look Elsewhere
Maintenance teams needing to strip oil and water from compressor discharge will find the 10 ppm filter rating and 150 HP label relevant. The 1/4 in NPT air inlet and 3/4 in water outlet suit standard piping. Facilities needing continuous, reusable filtration or a higher flow capacity than 0.53 cfm should look elsewhere.
Key Specification: 3 gal Absorption Module
The 3 gal absorption module volume determines how much condensate the separator can hold before the disposable single-use cartridge must be replaced. Operating temperature ranges from 32 to 125 Degrees F. The overall width and depth are both 11 in. Match this capacity and the 1/4 in condensate inlet to your compressor output.
Highlights
- Removes oil and water down to 10 ppm for clean air supply
- Handles compressors up to 50 hp for heavy-duty shop use
- 3 gal absorption module captures condensate before disposal
- Compact 27 in height fits tight utility spaces
- Operates reliably from 32 to 125 Degrees F across seasons
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
How can I confirm the SPEEDAIRE MP-0350 is removing oil down to the rated 10 ppm after installation?
The separator is rated to reduce oil content to 10 ppm. After setup, verify performance by testing the water outlet discharge with an oil-content test kit or by sending a sample to a lab for analysis.
What comes with the SPEEDAIRE MP-0350 and what fittings or modules must I purchase separately?
The unit includes the separator housing rated for 3 gal absorption volume with 1/4 in NPT air and condensate inlets and a 3/4 in water outlet. Replacement absorption modules are disposable single-use items that must be purchased separately when the original is spent.
Which capacity version of the SPEEDAIRE MP-0350 should I choose for a 50 hp compressor?
This model is specified for a maximum compressor horsepower of 50 hp and a maximum flow rate of 0.53 cfm. Select this 3 gal version when your compressor matches those ratings; do not exceed the 50 hp or 0.53 cfm limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
