SPEEDAIRE
SPEEDAIRE Linear Guide Air Gripper Parallel 14 mm stroke 63 mm length
Parallel pneumatic gripper with 14 mm stroke and 63 mm body length, operating between 14.5 and 101.5 psi
- TypeParallel
- Parallel jaw design gives even clamping force
- 14 mm stroke suits small-part handling
- Operates from 14.5 psi to 101.5 psi
- Anodized aluminium body with stainless steel fingers
- Compact 63 mm overall length fits tight spaces
Parallel air gripper for automation tasks
The SPEEDAIRE Linear Guide Air Gripper is a parallel-style pneumatic actuator designed for pick-and-place and light assembly operations. Its compact 63 mm overall length and 14 mm stroke suit space-constrained fixtures and robotic end-effectors. Anodised aluminium body and stainless-steel fingers resist wear in clean or mildly contaminated environments. The unit operates on standard shop air within a 14.5 to 101.5 psi range.
Suited for precision handling, not heavy clamping
Engineers building automated cells that require repeatable, parallel jaw motion will find the 33.3 mm open width and 33.6 mm height compatible with tight tooling envelopes. The metric design simplifies integration with ISO-pattern mounting holes common on linear slides. Applications demanding high gripping force, long stroke travel or angular jaw movement should evaluate alternative mechanisms because this model provides only 14 mm of parallel travel.
Check air supply and mounting pattern before
Verify that your compressed-air system can deliver clean, dry air consistently between 14.5 and 101.5 psi at the required flow rate for your cycle speed. Confirm the mounting hole pattern and thread dimensions on your existing end-of-arm tooling match the gripper’s metric interface. Ensure the 102.7 mm overall width and 33.6 mm height clear adjacent components throughout the full stroke.
Highlights
- Parallel jaw design gives even clamping force
- 14 mm stroke suits small-part handling
- Operates from 14.5 psi to 101.5 psi
- Anodized aluminium body with stainless steel fingers
- Compact 63 mm overall length fits tight spaces
Specifications
| Brand | Speedaire |
|---|---|
| Type | Parallel |
Questions about this item
What compressed-air supply and fittings must I already have to run this 14 mm stroke gripper at its 14.5–101.5 psi range?
You need a clean, dry compressed-air source regulated between 14.5 and 101.5 psi, plus metric pneumatic fittings and tubing sized for the gripper’s ports.
Can I mount this 63 mm long anodized-aluminium body alongside older imperial-pattern brackets?
The body uses metric mounting holes, so imperial brackets will not align without an adapter plate or re-drilling.
How do I verify the stainless-steel fingers are opening to the full 33.3 mm width after installation?
Pressurise the unit, then measure the finger-to-finger gap with a caliper; it should read 33.3 mm at the rated stroke.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
