We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SPEEDAIRE

SPEEDAIRE Coalescing Oil Removal Filter 3/4 NPT 32oz Metal Bowl 250 PSI 90 CFM

SKU CH-Z13P-6H1HX

Removes oil aerosols down to 0.01 microns with a 32.0 oz metal bowl rated for 250 PSI and 90 CFM flow

  • Removes oil down to 0.01 microns with coalescing media
  • Handles 90 CFM airflow for high-demand pneumatic systems
  • Metal bowl withstands 250 PSI maximum operating pressure
  • Operates up to 150 °F with metal bowl construction
  • 32 oz bowl capacity extends service intervals between drains

Product identity

This SPEEDAIRE coalescing oil removal filter removes oil aerosols down to .01 microns from compressed air lines. It is designed for workshops and industrial sites that need clean, dry air for pneumatic tools or finishing equipment.

Bowl and pressure specs

The metal bowl holds 32.0 ounces and is rated for 250 PSI at up to 150 degrees Fahrenheit. A built-in sight glass lets operators check condensate level without depressurising the system.

Installation checks

Verify that your supply line uses a 3/4 inch NPT thread and can deliver up to 90 CFM at the required pressure. Ensure the mounting location accommodates the 13.24 inch height and 4.75 inch width, and confirm the ambient temperature stays within the 150 degree Fahrenheit limit for the metal bowl.

Highlights

  • Removes oil down to 0.01 microns with coalescing media
  • Handles 90 CFM airflow for high-demand pneumatic systems
  • Metal bowl withstands 250 PSI maximum operating pressure
  • Operates up to 150 °F with metal bowl construction
  • 32 oz bowl capacity extends service intervals between drains

Specifications

BrandSpeedaire

Questions about this item

How often will the coalescing element need replacing in this 90 CFM filter?

The built-in service life indicator shows when the element is saturated; replace it at that point to maintain 0.01 micron filtration.

What pressure limit applies first during continuous operation with the metal bowl?

The housing is rated for 250 PSI maximum, so that is the ceiling you must not exceed under sustained use.

How hot does the bowl get when the filter runs all day at 150 °F inlet temperature?

The metal bowl is rated to 150 °F, matching the maximum operating temperature, so it will reach but not exceed that level.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.