SPEEDAIRE
SPEEDAIRE 4ZL53 Pneumatic Oil Filter 60 cfm 1/2 in NPT
Coalescing oil filter removes contaminants from compressed air at up to 60 cfm with 1/2 in NPT connections
- Coalescing filter removes oil aerosols for cleaner air supply
- 60 cfm maximum flow supports moderate pneumatic demand
- 250 psi maximum operating pressure handles high-pressure lines
- Metal bowl with manual drain simplifies maintenance
- 150 °F maximum temperature suits standard industrial environments
1/2 in NPT Coalescing Oil Filter
This SPEEDAIRE pneumatic oil filter uses a coalescing element to remove oil aerosols from compressed air lines. It accepts 1/2 in NPT female connections on both inlet and outlet with a maximum flow of 60 cfm. The metal bowl includes a manual drain for collected condensate. It is rated for 250 psi and 150 Degrees F maximum operating conditions.
Suits single-point lubrication removal
Installers needing clean, oil-free air at a single workstation or tool will find the 60 cfm capacity adequate for light-duty pneumatic equipment. Operations requiring higher flow rates, automated bowl drainage, or a differential pressure indicator should select a different filter series. The left-to-right flow orientation also fixes the piping layout.
60 cfm maximum flow rate
The 60 cfm rating is the decisive figure for sizing this filter to your compressor and downstream demand. Exceeding this flow will reduce coalescing efficiency and increase pressure drop across the element. Verify that your system peak demand stays within this limit before installation.
Highlights
- Coalescing filter removes oil aerosols for cleaner air supply
- 60 cfm maximum flow supports moderate pneumatic demand
- 250 psi maximum operating pressure handles high-pressure lines
- Metal bowl with manual drain simplifies maintenance
- 150 °F maximum temperature suits standard industrial environments
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
How do I confirm the filter is working once it is installed?
Check that the manual drain releases collected oil and that system pressure remains steady up to 250 psi during operation.
What comes in the box and what must I supply separately?
The filter unit with metal bowl and manual drain is included; you must provide 1/2 in NPT fittings and piping for the inlet and outlet.
When should I choose this 60 cfm model over another capacity?
Select this model when your compressor delivers up to 60 cfm and you need a 1/2 in NPT coalescing filter rated for 250 psi and 150 Degrees F.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
