SPEEDAIRE
SPEEDAIRE 45UZ55 dual spring return hose reel 25 ft 3/8 in 13 A 120 V
Spring-return dual reel holds 25 ft of 3/8 in air hose and a 14 AWG, 13 A, 120 V power cord, mounting on ceiling, floor or wall
- Dual air and electric supply from one compact reel
- Spring-return retracts 25 ft of 3/8 in hose automatically
- 13 A 120 V cord with NEMA 5-15R outlet powers tools directly
- Mounts on ceiling, wall or floor for flexible placement
- 300 psi rating handles demanding compressed-air applications
Dual spring-return reel
The SPEEDAIRE 45UZ55 is a dual spring-return hose reel designed for air and electric supply. It handles 25 ft of 3/8 in hose and a 13 A 120 V cord in a single ceiling, floor or wall mounted unit. Suited for workshops needing combined fluid and power delivery at the point of use.
Bundled hose and cord
The reel ships with both hose and cord factory fitted so installation is a single mounting step. The hose is rated from 0 psi to 300 psi and uses rubber seals. The 14 AWG feeder cord ends in a NEMA 1-15P plug while the retractable cord provides a NEMA 5-15R outlet. Spring return retracts both lines automatically after each use.
Users needing longer reach
This unit suits technicians who want a compact combined air and power drop within a 25 ft radius. It does not suit buyers who need more hose length or higher amperage than 13 A. Builders requiring enclosed housings or different voltage ratings should look at other configurations.
Highlights
- Dual air and electric supply from one compact reel
- Spring-return retracts 25 ft of 3/8 in hose automatically
- 13 A 120 V cord with NEMA 5-15R outlet powers tools directly
- Mounts on ceiling, wall or floor for flexible placement
- 300 psi rating handles demanding compressed-air applications
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
How often will the dual spring-return mechanism on the 45UZ55 need lubrication or spring replacement?
The spring-return drive is sealed for life and requires no scheduled lubrication; spring fatigue typically appears only after years of daily 25 ft extensions at 300 psi.
What limit appears first when the reel runs continuously at 13 A on the 14 AWG cord?
The 14 AWG feeder cord reaches its 13 A thermal rating before the 300 psi hose or spring mechanism shows stress.
How much heat and noise does the unit produce when the 120 V cord is powering a load all day?
The cord itself stays near ambient temperature at 13 A; the reel housing is silent because the spring drive has no motor or fan.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



