SPEEDAIRE
SPEEDAIRE 2YNN4 Exhaust Muffler 1 in NPT 160 cfm 300 psi .9 micron
Removes oil mist from exhaust air at up to 160 cfm and 300 psi with a .9 micron filter rating
- Reduces oil mist in exhaust air with 0.9 micron filtration
- Handles high-volume airflow up to 160 cfm for demanding systems
- Withstands operating pressures up to 300 psi for reliable performance
- Operates at temperatures up to 160 Degrees F for consistent use
- Durable aluminum and polypropylene construction resists corrosion and wear
SPEEDAIRE 2YNN4 Exhaust Muffler
The SPEEDAIRE 2YNN4 is an exhaust muffler designed to remove oil mist from compressed-air lines. It features a 1-inch NPT inlet, aluminium and polypropylene construction, and a 0.9 micron filter rating for clean exhaust discharge.
Suits shops needing oil-free exhaust air
This muffler suits workshops that require oil mist removal at flow rates up to 160 cfm and pressures up to 300 psi. It is not for systems that exceed the 160-degree F temperature limit or installations needing multiple inlet ports.
160 cfm maximum flow rate
The 160 cfm maximum flow rate is the primary figure for sizing this muffler to a compressor. Selecting a unit with insufficient capacity increases back-pressure and reduces tool performance.
Highlights
- Reduces oil mist in exhaust air with 0.9 micron filtration
- Handles high-volume airflow up to 160 cfm for demanding systems
- Withstands operating pressures up to 300 psi for reliable performance
- Operates at temperatures up to 160 Degrees F for consistent use
- Durable aluminum and polypropylene construction resists corrosion and wear
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
Will the 1 in NPT inlet on this muffler thread onto the existing port on my older compressor?
The muffler has a 1 in NPT air inlet, which matches standard 1 inch National Pipe Thread ports found on many compressors; verify your compressor's port size and thread type before installation.
How can I confirm the .9 micron filter is actually removing oil mist after I install it?
Check for clean exhaust air with no visible oil residue at the outlet and monitor downstream equipment for reduced oil buildup; a pressure drop across the muffler within expected range also indicates proper flow.
Does the box include any mounting brackets or adapters, or do I need to supply my own?
The supplied data lists no included accessories; the muffler body is aluminum and polypropylene with a single 1 in NPT inlet, so any brackets, fittings or piping must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
